Two identical Supermicro Servers were upgraded with 128 GB RAM
Hardware Specs :
Mainboard H8DG6/i(-F) with 3ware Hardware Raid controller
3w-9xxx: scsi4: Found a 3ware 9000 Storage Controller at 0xdffdf000, IRQ: 18.
3w-9xxx: scsi4: Firmware FE9X 4.08.00.006, BIOS BE9X 4.08.00.001, Ports: 4.
scsi 4:0:0:0: Direct-Access AMCC 9650SE-4LP DISK 4.08 PQ: 0 ANSI: 5
2 x Processor AMD Opteron 6376
Dual CPU System with 32 cores
we use two different proxmox versions :
a) new proxmox 3.0 with debian 7.0
b) latest proxmox 2 version with Linux kernel 2.6.32-17-pve #1 SMP Wed Nov 28 07:15:55 CET 2012 x86_64 GNU/Linux ( debian 6)
We assume its a kernel bug.
When booting both servers we get these error messages :
[Firmware Bug] : cpu0, invalid threshold interrupt offset 0 for bank4, block 1
How critical is this error ?
Is there a patch availiable ?
Regards
Martin
Hardware Specs :
Mainboard H8DG6/i(-F) with 3ware Hardware Raid controller
3w-9xxx: scsi4: Found a 3ware 9000 Storage Controller at 0xdffdf000, IRQ: 18.
3w-9xxx: scsi4: Firmware FE9X 4.08.00.006, BIOS BE9X 4.08.00.001, Ports: 4.
scsi 4:0:0:0: Direct-Access AMCC 9650SE-4LP DISK 4.08 PQ: 0 ANSI: 5
2 x Processor AMD Opteron 6376
Dual CPU System with 32 cores
we use two different proxmox versions :
a) new proxmox 3.0 with debian 7.0
b) latest proxmox 2 version with Linux kernel 2.6.32-17-pve #1 SMP Wed Nov 28 07:15:55 CET 2012 x86_64 GNU/Linux ( debian 6)
We assume its a kernel bug.
When booting both servers we get these error messages :
[Firmware Bug] : cpu0, invalid threshold interrupt offset 0 for bank4, block 1
How critical is this error ?
Is there a patch availiable ?
Regards
Martin
Attachments
Last edited: