Fencing with ILO question

[snowman66]

Try to manually add ip's / hosts names in /etc/hosts file ...but i'm not sure if this is needed.
https://alteeve.ca/w/Configuring_HP_iLO_2_on_EL5

 

[dietmar]

-<cluster name="LIN-CLUPOX-002" config_version="9">
+<cluster name="LIN-CLUPOX-002" config_version="3">

You do not update the version (current version is 9, and you try to commit version 3)!

 

[dietmar]

yes i do.
what happen when i write now version 20

Anything greater than the current version will work.

 

[yves1984]

Anything greater than the current version will work.

Thx for your help.
I will try it on monday, because today im on school

 

[yves1984]

Hello together hope so that u have also a good weekend.

Today was my FencingDay again.....
but at the moment i become only some errors. Its a syntax error in Line0. Witch config does the fence_ilo-Command use? perhabs i've got there a mistake on my config.

Here is a picture with my error

is the error in the /etc/pve/cluster.conf file?

 

[yves1984]

Try to manually add ip's / hosts names in /etc/hosts file ...but i'm not sure if this is needed.
https://alteeve.ca/w/Configuring_HP_iLO_2_on_EL5

I don't have any party from ILO on the directory /etc/init.d
Now i think i must install de ILO files on my proxmox server.
I download the HP_ProLiant_Value_Add_Software-8.70-10-6.iso and mount it on proxmox to install all the files from the cd /mnt/pool/non-free/
but i become only some errors.
I've got 3 ProLiant DL 380G5 with ILO2

sorry that i'm a noob ....

 

[HedgeHog]

Hello everybody,

I'm just trying to evaluate Proxmox VE 3.0 with a 2 Node HA Cluster - with 2 HP DL380 G5 as Nodes, and I'm spotting the same errors.
I've just found a similar Post in a HP Board: http://h30499.www3.hp.com/t5/System-Administration/fence-ilo/td-p/4766101#.Ua9kNdKSJBo , they recommend to update iLO.
So I'll try that tomorrow and let you know if that will fix it.

cheers

 

[yves1984]

Hi HedgeHog I-ve got also DL380 G5 but i recive all time a error when i want to update mz ILO

I fence my device now with ipmi. It's easy to config and i can use my ILO-Port for this.

 

[yves1984]

Hello together

I do the fencing now with IPMI and its works. I don't know why does it not funktion with ILO.
But thx to all for your help