Failed to start Copy rules generated while the root was ro

[fieraf]

hello
when I install proxmox ve 4.2 I have this error

udev-finish.service - Copy rules generated while the root was ro
Loaded: loaded (/lib/systemd/system/udev-finish.service; static)
Active: failed (Result: exit-code) since Tue 2016-05-31 09:17:58 CEST; 10min ago
Main PID: 517 (code=exited, status=2)

May 31 09:17:58 pve udev-finish[517]: /lib/udev/udev-finish: 6: /lib/udev/udev-finish: cannot create /etc/udev/rules.d/70-pe... system
May 31 09:17:58 pve systemd[1]: udev-finish.service: main process exited, code=exited, status=2/INVALIDARGUMENT
May 31 09:17:58 pve systemd[1]: Failed to start Copy rules generated while the root was ro.
May 31 09:17:58 pve systemd[1]: Unit udev-finish.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.

It's important or not?
After I've installed proxmox , I've created my /etc/network/interfaces file whithout problem
There is a solution for this error?

Sorry for the much questions, but I'm new user of the proxmox

regards

 

[WhoCares?]

This solution from the Ubuntu forums worked for me: http://askubuntu.com/a/618536

Actually, in most cases the problem can be ignored for the NICs will get enumerated correctly on boot. However, on my freshly installed HP ProLint 360G9's Proxmox sometimes came up with mixed up 1G and 10G interfaces. The solution above solved that for me.