Good morning.
I'm experimenting extremelly hot temp spikes (up to 84C) on my Samsung EVO 980 drive, there's no ZFS pools on it, it's just where Proxmox installation resides, no VMs there, only Proxmox OS, here is some information:
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.35-2-pve] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: Samsung SSD 980 250GB
Firmware Version: 1B4QFXO7
PCI Vendor/Subsystem ID: 0x144d
IEEE OUI Identifier: 0x002538
Total NVM Capacity: 250,059,350,016 [250 GB]
Unallocated NVM Capacity: 0
Controller ID: 5
NVMe Version: 1.4
Number of Namespaces: 1
Namespace 1 Size/Capacity: 250,059,350,016 [250 GB]
Namespace 1 Utilization: 48,506,912,768 [48.5 GB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 002538 d211412c9b
Local Time is: Sat Jun 11 13:48:16 2022 CEST
Firmware Updates (0x16): 3 Slots, no Reset required
Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
Optional NVM Commands (0x0055): Comp DS_Mngmt Sav/Sel_Feat Timestmp
Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg
Maximum Data Transfer Size: 512 Pages
Warning Comp. Temp. Threshold: 82 Celsius
Critical Comp. Temp. Threshold: 85 Celsius
Namespace 1 Features (0x10): NP_Fields
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 5.24W - - 0 0 0 0 0 0
1 + 4.49W - - 1 1 1 1 0 0
2 + 2.19W - - 2 2 2 2 0 500
3 - 0.0500W - - 3 3 3 3 210 1200
4 - 0.0050W - - 4 4 4 4 1000 9000
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 0
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 49 Celsius
Available Spare: 94%
Available Spare Threshold: 10%
Percentage Used: 8%
Data Units Read: 3,886,527 [1.98 TB]
Data Units Written: 8,298,370 [4.24 TB]
Host Read Commands: 18,532,175
Host Write Commands: 629,599,330
Controller Busy Time: 1,103
Power Cycles: 308
Power On Hours: 3,506
Unsafe Shutdowns: 33
Media and Data Integrity Errors: 0
Error Information Log Entries: 0
Warning Comp. Temperature Time: 33
Critical Comp. Temperature Time: 0
Temperature Sensor 1: 49 Celsius
Temperature Sensor 2: 55 Celsius
Thermal Temp. 2 Transition Count: 5908
Thermal Temp. 2 Total Time: 2539
Error Information (NVMe Log 0x01, 16 of 64 entries)
No Errors Logged
¿Is there anyone suffering from the same issue on v7.2?
Thanks in advance.
I'm experimenting extremelly hot temp spikes (up to 84C) on my Samsung EVO 980 drive, there's no ZFS pools on it, it's just where Proxmox installation resides, no VMs there, only Proxmox OS, here is some information:
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.35-2-pve] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: Samsung SSD 980 250GB
Firmware Version: 1B4QFXO7
PCI Vendor/Subsystem ID: 0x144d
IEEE OUI Identifier: 0x002538
Total NVM Capacity: 250,059,350,016 [250 GB]
Unallocated NVM Capacity: 0
Controller ID: 5
NVMe Version: 1.4
Number of Namespaces: 1
Namespace 1 Size/Capacity: 250,059,350,016 [250 GB]
Namespace 1 Utilization: 48,506,912,768 [48.5 GB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 002538 d211412c9b
Local Time is: Sat Jun 11 13:48:16 2022 CEST
Firmware Updates (0x16): 3 Slots, no Reset required
Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
Optional NVM Commands (0x0055): Comp DS_Mngmt Sav/Sel_Feat Timestmp
Log Page Attributes (0x0f): S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg
Maximum Data Transfer Size: 512 Pages
Warning Comp. Temp. Threshold: 82 Celsius
Critical Comp. Temp. Threshold: 85 Celsius
Namespace 1 Features (0x10): NP_Fields
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 5.24W - - 0 0 0 0 0 0
1 + 4.49W - - 1 1 1 1 0 0
2 + 2.19W - - 2 2 2 2 0 500
3 - 0.0500W - - 3 3 3 3 210 1200
4 - 0.0050W - - 4 4 4 4 1000 9000
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 0
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 49 Celsius
Available Spare: 94%
Available Spare Threshold: 10%
Percentage Used: 8%
Data Units Read: 3,886,527 [1.98 TB]
Data Units Written: 8,298,370 [4.24 TB]
Host Read Commands: 18,532,175
Host Write Commands: 629,599,330
Controller Busy Time: 1,103
Power Cycles: 308
Power On Hours: 3,506
Unsafe Shutdowns: 33
Media and Data Integrity Errors: 0
Error Information Log Entries: 0
Warning Comp. Temperature Time: 33
Critical Comp. Temperature Time: 0
Temperature Sensor 1: 49 Celsius
Temperature Sensor 2: 55 Celsius
Thermal Temp. 2 Transition Count: 5908
Thermal Temp. 2 Total Time: 2539
Error Information (NVMe Log 0x01, 16 of 64 entries)
No Errors Logged
¿Is there anyone suffering from the same issue on v7.2?
Thanks in advance.
Last edited:
