Hello everyone,
Since a couple of days I receive the following error message. It seems like a problem with The Proxmox Cluster file system (“pmxcfs”) and de NVME SSD.
[16821.351985] EX14-fs error (device nvme0n1p2): ext journal_check_start:84: comm poxcfs: Detected aborted journal
[16821.351987] EX14-fs error (device nvme0n1p2) in ext4_reserve_inode_write:5790: Journal has aborted
[16821.371313] EX14-fs (nvme0n1p2): Remounting filesystem read-only
After a hard restart, the system works properly for some time.
Hardware Config:
- Raspberry Pi 5 8GB
- GeeekPi N04 M.2 M-Key NVMe SSD Shield for Raspberry Pi 5, M.2 2280 PCIe to NVMe SSD Shield PiP PCIe Peripheral Board Top for Raspberry Pi 5 4GB/8GB
- WD BLACK SN770 NVMe SSD 1 TB
Software Config:
- PiMox Proxmox Virtual Environment 8.3.1+port1
- Installed 1 VM with HOAS / Home Assistant.
Hopefully someone could help me of guide me in the right direction.
Since a couple of days I receive the following error message. It seems like a problem with The Proxmox Cluster file system (“pmxcfs”) and de NVME SSD.
[16821.351985] EX14-fs error (device nvme0n1p2): ext journal_check_start:84: comm poxcfs: Detected aborted journal
[16821.351987] EX14-fs error (device nvme0n1p2) in ext4_reserve_inode_write:5790: Journal has aborted
[16821.371313] EX14-fs (nvme0n1p2): Remounting filesystem read-only
After a hard restart, the system works properly for some time.
Hardware Config:
- Raspberry Pi 5 8GB
- GeeekPi N04 M.2 M-Key NVMe SSD Shield for Raspberry Pi 5, M.2 2280 PCIe to NVMe SSD Shield PiP PCIe Peripheral Board Top for Raspberry Pi 5 4GB/8GB
- WD BLACK SN770 NVMe SSD 1 TB
Software Config:
- PiMox Proxmox Virtual Environment 8.3.1+port1
- Installed 1 VM with HOAS / Home Assistant.
Hopefully someone could help me of guide me in the right direction.