Hello,
i have a backup server with this Zpool error and the pool is off line
------------------------------------------------------------------------------------------------------
zpool status -xv
pool: STORAGE
state: ONLINE
status: One or more devices are faulted in response to IO failures.
action: Make sure the affected devices are connected, then run 'zpool clear'.
see: http://zfsonlinux.org/msg/ZFS-8000-HC
scan: resilver canceled on Thu Jan 1 01:00:00 1970
config:
NAME STATE READ WRITE CKSUM
STORAGE ONLINE 2 0 0
mirror-0 ONLINE 7 0 0
sdc1 ONLINE 13 477 18
sdd1 ONLINE 5 5.90K 0
errors: List of errors unavailable (insufficient privileges)
------------------------------------------------------------------------------------------------------
If i try zpool import,
both disk go in resilver state for some time and than the pool come back off line.
SMART on both disk is OK
Someone have experienced same issue ? ..Solutions ?
Thanks!
i have a backup server with this Zpool error and the pool is off line
------------------------------------------------------------------------------------------------------
zpool status -xv
pool: STORAGE
state: ONLINE
status: One or more devices are faulted in response to IO failures.
action: Make sure the affected devices are connected, then run 'zpool clear'.
see: http://zfsonlinux.org/msg/ZFS-8000-HC
scan: resilver canceled on Thu Jan 1 01:00:00 1970
config:
NAME STATE READ WRITE CKSUM
STORAGE ONLINE 2 0 0
mirror-0 ONLINE 7 0 0
sdc1 ONLINE 13 477 18
sdd1 ONLINE 5 5.90K 0
errors: List of errors unavailable (insufficient privileges)
------------------------------------------------------------------------------------------------------
If i try zpool import,
both disk go in resilver state for some time and than the pool come back off line.
SMART on both disk is OK
Someone have experienced same issue ? ..Solutions ?
Thanks!