Error loading \EFI\proxmox\5.15.30-2 (zfs raid1 nvme ibm x3650 m2)

[stefgrifon]

Hello,

I made an installation Proxmox 7.2 with any errors on IBM SYSTEM X3650 M3 like that:



unfortunately i received this failure in the boot



Can you help me please?


Thank you in advance
Stefanos

 

[Stoiko Ivanov]

seems odd - and might point to a hardware problem.

things I would try:
* Install to only one of the disks and see if this works - then the other one
* if one of the disks does not work - you might have found the issue

else - It's always a good idea to make sure to install the latest available firmware of all components in the system.

I hope this helps!

 

[stefgrifon]

seems odd - and might point to a hardware problem.

things I would try:
* Install to only one of the disks and see if this works - then the other one
* if one of the disks does not work - you might have found the issue

else - It's always a good idea to make sure to install the latest available firmware of all components in the system.

I hope this helps!

Hello,

Thank you for your answer

I checked again. All the firmwares are in the last version.
I forgot to write the model off pcie card adaptor. It is DElock 89630 NVME M2.

I tried to install on this ssd. The installation finished without errors, proxmox add also the boot option but unfortunately cannot boot. Also,it doesn't give me any error message, just moves on to the next boot.


i installed on this ssd and everything is OK. it Works totally fine.


Both M2 ssd i have put to the same pcie Card adapter. with the only difference that /dev/sda communicates with sata.


How can i skip this problem? My goal is to make the installation on zfs raid1.

 

[Stoiko Ivanov]

Maybe your mainboard/the installed BIOS/UEFI version simply cannot boot from the m2-pcie adapter card?