Hi,
Happy new year
!!
Yesterday, i've lost the ethernet connection on my Proxmox.
Console is okay, but no IP available.
A restart of the server will make available the server on the network.
My server is a NUC based on DeskMini 310 Series. After checking the doc, the LAN is based on Intel® Gigabit I219V.
After checking the logs, repetitively every 5 minutes, due to the lack of network interfaces until the morning... :
- mypve :
- my NIC:
- my interfaces :
- my ethtool summary :
After some research, seems to be a bug on this cheap network card.
https://forum.proxmox.com/threads/e1000-driver-hang.58284/page-8#post-390709
But tso, gro, gso are already OFF in my configuration.
Any tips to modify the interfaces configuration to reach an ideal ethtool configuration of my eno1 ?
Thank you !
Happy new year
!!Yesterday, i've lost the ethernet connection on my Proxmox.
Console is okay, but no IP available.
A restart of the server will make available the server on the network.
My server is a NUC based on DeskMini 310 Series. After checking the doc, the LAN is based on Intel® Gigabit I219V.
After checking the logs, repetitively every 5 minutes, due to the lack of network interfaces until the morning... :
Code:
Jan 02 21:35:09 pve kernel: e1000e 0000:00:1f.6 eno1: Detected Hardware Unit Hang:
TDH <0>
TDT <1f>
next_to_use <1f>
next_to_clean <0>
buffer_info[next_to_clean]:
time_stamp <14eb7499f>
next_to_watch <0>
jiffies <14eb752f8>
next_to_watch.status <0>
MAC Status <40080083>
PHY Status <796d>
PHY 1000BASE-T Status <3c00>
PHY Extended Status <3000>
PCI Status <10>
Jan 02 21:35:09 pve kernel: e1000e 0000:00:1f.6 eno1: Reset adapter unexpectedly- mypve :
Code:
proxmox-ve: 8.0.2 (running kernel: 6.2.16-15-pve)
pve-manager: 8.0.4 (running version: 8.0.4/d258a813cfa6b390)
pve-kernel-6.2: 8.0.5
proxmox-kernel-helper: 8.0.3
proxmox-kernel-6.2.16-15-pve: 6.2.16-15
proxmox-kernel-6.2: 6.2.16-15
pve-kernel-6.2.16-3-pve: 6.2.16-3
ceph-fuse: 17.2.6-pve1+3
corosync: 3.1.7-pve3
criu: 3.17.1-2
glusterfs-client: 10.3-5
ifupdown2: 3.2.0-1+pmx5
ksm-control-daemon: 1.4-1
libjs-extjs: 7.0.0-4
libknet1: 1.26-pve1
libproxmox-acme-perl: 1.4.6
libproxmox-backup-qemu0: 1.4.0
libproxmox-rs-perl: 0.3.1
libpve-access-control: 8.0.5
libpve-apiclient-perl: 3.3.1
libpve-common-perl: 8.0.9
libpve-guest-common-perl: 5.0.5
libpve-http-server-perl: 5.0.4
libpve-rs-perl: 0.8.5
libpve-storage-perl: 8.0.2
libspice-server1: 0.15.1-1
lvm2: 2.03.16-2
lxc-pve: 5.0.2-4
lxcfs: 5.0.3-pve3
novnc-pve: 1.4.0-2
proxmox-backup-client: 3.0.3-1
proxmox-backup-file-restore: 3.0.3-1
proxmox-kernel-helper: 8.0.3
proxmox-mail-forward: 0.2.0
proxmox-mini-journalreader: 1.4.0
proxmox-widget-toolkit: 4.0.9
pve-cluster: 8.0.4
pve-container: 5.0.4
pve-docs: 8.0.5
pve-edk2-firmware: 3.20230228-4
pve-firewall: 5.0.3
pve-firmware: 3.8-2
pve-ha-manager: 4.0.2
pve-i18n: 3.0.7
pve-qemu-kvm: 8.0.2-6
pve-xtermjs: 4.16.0-3
qemu-server: 8.0.7
smartmontools: 7.3-pve1
spiceterm: 3.3.0
swtpm: 0.8.0+pve1
vncterm: 1.8.0
zfsutils-linux: 2.1.13-pve1- my NIC:
Code:
00:1f.6 Ethernet controller [0200]: Intel Corporation Ethernet Connection (7) I219-V [8086:15bc] (rev 10)
DeviceName: Onboard - Ethernet
Subsystem: ASRock Incorporation Ethernet Connection (7) I219-V [1849:15bc]
Kernel driver in use: e1000e
Kernel modules: e1000e- my interfaces :
Code:
auto lo
iface lo inet loopback
iface eno1 inet manual
auto vmbr0
iface vmbr0 inet static
address 192.168.2.80/24
gateway 192.168.2.1
bridge-ports eno1
bridge-stp off
bridge-fd 0- my ethtool summary :
Code:
Features for eno1:
rx-checksumming: on
tx-checksumming: on
tx-checksum-ipv4: off [fixed]
tx-checksum-ip-generic: on
tx-checksum-ipv6: off [fixed]
tx-checksum-fcoe-crc: off [fixed]
tx-checksum-sctp: off [fixed]
scatter-gather: on
tx-scatter-gather: on
tx-scatter-gather-fraglist: off [fixed]
tcp-segmentation-offload: on
tx-tcp-segmentation: on
tx-tcp-ecn-segmentation: off [fixed]
tx-tcp-mangleid-segmentation: off
tx-tcp6-segmentation: on
generic-segmentation-offload: on
generic-receive-offload: on
large-receive-offload: off [fixed]
rx-vlan-offload: on
tx-vlan-offload: on
ntuple-filters: off [fixed]
receive-hashing: on
highdma: on [fixed]
rx-vlan-filter: off [fixed]
vlan-challenged: off [fixed]
tx-lockless: off [fixed]
netns-local: off [fixed]
tx-gso-robust: off [fixed]
tx-fcoe-segmentation: off [fixed]
tx-gre-segmentation: off [fixed]
tx-gre-csum-segmentation: off [fixed]
tx-ipxip4-segmentation: off [fixed]
tx-ipxip6-segmentation: off [fixed]
tx-udp_tnl-segmentation: off [fixed]
tx-udp_tnl-csum-segmentation: off [fixed]
tx-gso-partial: off [fixed]
tx-tunnel-remcsum-segmentation: off [fixed]
tx-sctp-segmentation: off [fixed]
tx-esp-segmentation: off [fixed]
tx-udp-segmentation: off [fixed]
tx-gso-list: off [fixed]
fcoe-mtu: off [fixed]
tx-nocache-copy: off
loopback: off [fixed]
rx-fcs: off
rx-all: off
tx-vlan-stag-hw-insert: off [fixed]
rx-vlan-stag-hw-parse: off [fixed]
rx-vlan-stag-filter: off [fixed]
l2-fwd-offload: off [fixed]
hw-tc-offload: off [fixed]
esp-hw-offload: off [fixed]
esp-tx-csum-hw-offload: off [fixed]
rx-udp_tunnel-port-offload: off [fixed]
tls-hw-tx-offload: off [fixed]
tls-hw-rx-offload: off [fixed]
rx-gro-hw: off [fixed]
tls-hw-record: off [fixed]
rx-gro-list: off
macsec-hw-offload: off [fixed]
rx-udp-gro-forwarding: off
hsr-tag-ins-offload: off [fixed]
hsr-tag-rm-offload: off [fixed]
hsr-fwd-offload: off [fixed]
hsr-dup-offload: off [fixed]After some research, seems to be a bug on this cheap network card.
https://forum.proxmox.com/threads/e1000-driver-hang.58284/page-8#post-390709
But tso, gro, gso are already OFF in my configuration.
Any tips to modify the interfaces configuration to reach an ideal ethtool configuration of my eno1 ?
Thank you !
Last edited: