Hallo zusammen,
ich hab das Problem, dass das mein PVE trotz Einstellung "E-Mail nur bei Fehler" zwei Mails jeden Tag bei mir aufschlagen. EInmal von VZDUMP und einemal direkt vom PVE.
Hier eine Beispielmail:
Total running time: 19s
106: 2023-11-23 08:13:10 INFO: Starting Backup of VM 106 (qemu)
106: 2023-11-23 08:13:10 INFO: status = running
106: 2023-11-23 08:13:10 INFO: VM Name: Titan
106: 2023-11-23 08:13:10 INFO: include disk 'scsi1' 'RAID10:106/vm-106-disk-0.raw' 600G
106: 2023-11-23 08:13:10 INFO: include disk 'virtio0' 'RAID10:106/vm-106-disk-3.qcow2' 64G
106: 2023-11-23 08:13:10 INFO: backup mode: snapshot
106: 2023-11-23 08:13:10 INFO: ionice priority: 7
106: 2023-11-23 08:13:10 INFO: skip unused drive 'RAID10:106/vm-106-disk-1.qcow2' (not included into backup)
106: 2023-11-23 08:13:10 INFO: skip unused drive 'RAID10:106/vm-106-disk-2.raw' (not included into backup)
106: 2023-11-23 08:13:10 INFO: creating Proxmox Backup Server archive 'vm/106/2023-11-23T07:13:10Z'
106: 2023-11-23 08:13:10 INFO: issuing guest-agent 'fs-freeze' command
106: 2023-11-23 08:13:12 INFO: issuing guest-agent 'fs-thaw' command
106: 2023-11-23 08:13:15 INFO: started backup task 'f0ac07d8-1864-454f-8d16-f295762b2861'
106: 2023-11-23 08:13:15 INFO: resuming VM again
106: 2023-11-23 08:13:15 INFO: scsi1: dirty-bitmap status: OK (68.0 MiB of 600.0 GiB dirty)
106: 2023-11-23 08:13:15 INFO: virtio0: dirty-bitmap status: OK (1.6 GiB of 64.0 GiB dirty)
106: 2023-11-23 08:13:15 INFO: using fast incremental mode (dirty-bitmap), 1.6 GiB dirty of 664.0 GiB total
106: 2023-11-23 08:13:18 INFO: 63% (1.0 GiB of 1.6 GiB) in 3s, read: 356.0 MiB/s, write: 345.3 MiB/s
106: 2023-11-23 08:13:21 INFO: 97% (1.6 GiB of 1.6 GiB) in 6s, read: 192.0 MiB/s, write: 190.7 MiB/s
106: 2023-11-23 08:13:24 INFO: 100% (1.6 GiB of 1.6 GiB) in 9s, read: 12.0 MiB/s, write: 10.7 MiB/s
106: 2023-11-23 08:13:24 INFO: Waiting for server to finish backup validation...
106: 2023-11-23 08:13:29 INFO: backup is sparse: 4.00 MiB (0%) total zero data
106: 2023-11-23 08:13:29 INFO: backup was done incrementally, reused 662.40 GiB (99%)
106: 2023-11-23 08:13:29 INFO: transferred 1.64 GiB in 14 seconds (120.0 MiB/s)
106: 2023-11-23 08:13:29 INFO: adding notes to backup
106: 2023-11-23 08:13:29 INFO: Finished Backup of VM 106 (00:00:19)
Hat jemand einen Verdacht, wo ich die Konfiguration geschrottet haben könnte?
Danke im Voraus!
Viele Grüße
Christian aka Devian242
ich hab das Problem, dass das mein PVE trotz Einstellung "E-Mail nur bei Fehler" zwei Mails jeden Tag bei mir aufschlagen. EInmal von VZDUMP und einemal direkt vom PVE.
Hier eine Beispielmail:
Details
VMID | Name | Status | Time | Size | Filename |
---|---|---|---|---|---|
106 | Titan | ok | 19s | 664 GiB | vm/106/2023-11-23T07:13:10Z |
Logs
vzdump 106 --mode snapshot --notes-template '{{guestname}}' --all 0 --mailto c.werner@XXXXXXXXXXXXXX.de --storage Pyro --mailnotification failure --node pve106: 2023-11-23 08:13:10 INFO: Starting Backup of VM 106 (qemu)
106: 2023-11-23 08:13:10 INFO: status = running
106: 2023-11-23 08:13:10 INFO: VM Name: Titan
106: 2023-11-23 08:13:10 INFO: include disk 'scsi1' 'RAID10:106/vm-106-disk-0.raw' 600G
106: 2023-11-23 08:13:10 INFO: include disk 'virtio0' 'RAID10:106/vm-106-disk-3.qcow2' 64G
106: 2023-11-23 08:13:10 INFO: backup mode: snapshot
106: 2023-11-23 08:13:10 INFO: ionice priority: 7
106: 2023-11-23 08:13:10 INFO: skip unused drive 'RAID10:106/vm-106-disk-1.qcow2' (not included into backup)
106: 2023-11-23 08:13:10 INFO: skip unused drive 'RAID10:106/vm-106-disk-2.raw' (not included into backup)
106: 2023-11-23 08:13:10 INFO: creating Proxmox Backup Server archive 'vm/106/2023-11-23T07:13:10Z'
106: 2023-11-23 08:13:10 INFO: issuing guest-agent 'fs-freeze' command
106: 2023-11-23 08:13:12 INFO: issuing guest-agent 'fs-thaw' command
106: 2023-11-23 08:13:15 INFO: started backup task 'f0ac07d8-1864-454f-8d16-f295762b2861'
106: 2023-11-23 08:13:15 INFO: resuming VM again
106: 2023-11-23 08:13:15 INFO: scsi1: dirty-bitmap status: OK (68.0 MiB of 600.0 GiB dirty)
106: 2023-11-23 08:13:15 INFO: virtio0: dirty-bitmap status: OK (1.6 GiB of 64.0 GiB dirty)
106: 2023-11-23 08:13:15 INFO: using fast incremental mode (dirty-bitmap), 1.6 GiB dirty of 664.0 GiB total
106: 2023-11-23 08:13:18 INFO: 63% (1.0 GiB of 1.6 GiB) in 3s, read: 356.0 MiB/s, write: 345.3 MiB/s
106: 2023-11-23 08:13:21 INFO: 97% (1.6 GiB of 1.6 GiB) in 6s, read: 192.0 MiB/s, write: 190.7 MiB/s
106: 2023-11-23 08:13:24 INFO: 100% (1.6 GiB of 1.6 GiB) in 9s, read: 12.0 MiB/s, write: 10.7 MiB/s
106: 2023-11-23 08:13:24 INFO: Waiting for server to finish backup validation...
106: 2023-11-23 08:13:29 INFO: backup is sparse: 4.00 MiB (0%) total zero data
106: 2023-11-23 08:13:29 INFO: backup was done incrementally, reused 662.40 GiB (99%)
106: 2023-11-23 08:13:29 INFO: transferred 1.64 GiB in 14 seconds (120.0 MiB/s)
106: 2023-11-23 08:13:29 INFO: adding notes to backup
106: 2023-11-23 08:13:29 INFO: Finished Backup of VM 106 (00:00:19)
Hat jemand einen Verdacht, wo ich die Konfiguration geschrottet haben könnte?
Danke im Voraus!
Viele Grüße
Christian aka Devian242