A ashman70 New Member Nov 24, 2023 2 0 1 Nov 24, 2023 #1 I just setup a proxmox server that has two hard drives. A 2TB SSD onto which proxmox was installed and there should be a second NVME SSD however I do not see it. The output of the LVS command shows this: I do not see the second 2TB har drive. Attachments Screenshot 2023-11-24 at 5.21.24 PM.png 49.3 KB · Views: 24
I just setup a proxmox server that has two hard drives. A 2TB SSD onto which proxmox was installed and there should be a second NVME SSD however I do not see it. The output of the LVS command shows this: I do not see the second 2TB har drive.
Dunuin Distinguished Member Jun 30, 2020 14,796 4,718 258 Germany Nov 24, 2023 #2 Check if lsblk or lspci shows it. You will have to create a storage first before you can make use of the second disk.
Check if lsblk or lspci shows it. You will have to create a storage first before you can make use of the second disk.
A ashman70 New Member Nov 24, 2023 2 0 1 Nov 24, 2023 #3 Thanks I actually found it and resolved the issue myself.
