DELL PowerEdge R760xa server purchased
- 64 x INTEL(R) XEON(R) SILVER 4514Y (2 Sockets)
- RAM 128Gb
- GPU L40S
- PERC H755N Front
- INTEL SSDPE2KE016T8 2 PIECES
Help me choose the configuration of the controller and the array. In NVMe NON-RAID mode, the controller's operating mode still remains as RAID. When polling disks from the Operating System via smartctl -a /dev/sda, a cropped SMART table is displayed.
=== START OF INFORMATION SECTION ===
Vendor: NVMe
Product: INTEL SSDPE2KE01
Revision: 0152
Compliance: SPC-5
User Capacity: 1,600,321,314,816 bytes [1.60 TB]
Logical block size: 512 bytes
LU is resource provisioned, LBPRZ=0
Rotation Rate: Solid State Device
Logical Unit id: 0x01000000010000005cd2e46be54856510x000148e56be4d25c
Serial number: PHLN326************
Device type: disk
Transport protocol: SAS (SPL-4)
Local Time is: Wed Jan 21 11:30:08 2026 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Percentage used endurance indicator: 0%
Current Drive Temperature: 27 C
Drive Trip Temperature: 70 C
Where indicated
Transport protocol: SAS (SPL-4)
Will ZFS work with all its advantages in this version?
- 64 x INTEL(R) XEON(R) SILVER 4514Y (2 Sockets)
- RAM 128Gb
- GPU L40S
- PERC H755N Front
- INTEL SSDPE2KE016T8 2 PIECES
Help me choose the configuration of the controller and the array. In NVMe NON-RAID mode, the controller's operating mode still remains as RAID. When polling disks from the Operating System via smartctl -a /dev/sda, a cropped SMART table is displayed.
=== START OF INFORMATION SECTION ===
Vendor: NVMe
Product: INTEL SSDPE2KE01
Revision: 0152
Compliance: SPC-5
User Capacity: 1,600,321,314,816 bytes [1.60 TB]
Logical block size: 512 bytes
LU is resource provisioned, LBPRZ=0
Rotation Rate: Solid State Device
Logical Unit id: 0x01000000010000005cd2e46be54856510x000148e56be4d25c
Serial number: PHLN326************
Device type: disk
Transport protocol: SAS (SPL-4)
Local Time is: Wed Jan 21 11:30:08 2026 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Percentage used endurance indicator: 0%
Current Drive Temperature: 27 C
Drive Trip Temperature: 70 C
Where indicated
Transport protocol: SAS (SPL-4)
Will ZFS work with all its advantages in this version?