dell poweredge t110 install problem

[realisty]

hello
i have dell t110 server
i would like to install proxmox
i have read the problem with build in raid controller so i bought perc h310 and configure raid 10
when i se proxmox install menu i choose install then black screen and reboot or freeze
after some reboots system install success
but system after install when i see grub menu freeze or reboot sometimes start ok until reboot
please help

 

[Stoiko Ivanov]

Hm - could you try to start the installation in 'Debug mode' and post some screen-shots of how far you get?

As an alternative you can consider setting up PVE on top of a plain debian installation: https://pve.proxmox.com/pve-docs/pve-admin-guide.html#_install_proxmox_ve_on_debian

I hope this helps!

 

[realisty]

thank you for answear i will try debian but it is the same problem reboot or freeze

i have record the video
https://youtu.be/DPcW4-xKl4Q

 

[jaceqp]

Perhapse some RAID controller issue?
What's the H310 RAID setup? Firmware also matters since compared to DELL PERC firmware IT firmware (LSI one) significantly increases queue depth...
See: https://www.vladan.fr/flash-dell-perc-h310-with-it-firmware/

Also try non-raid (JBOD/HBA) and setup ZFS RAID instead (if possible)...

 

[realisty]

i have 4 disk in raid 10
i will try your your link and let you know

 

[realisty]

i have problem megarec can't finish
Supports 1078 controller and its Successors.


and that's all