DELL PowerEdge R720 - installation errors on integrated SD cards

nick

Active Member
Mar 28, 2007
364
1
38
Hi all, I just purchase a new DELL PowerEdge R720 with 2xCPU, 32GB RAM, SAS controller raid 10 and integrated SD (RAID 1) for boot.

I replace the 1GB SD card's with 1 x 32GB SD cards (20 MB read/write performance) I set BIOS to boot from SD card device and proceed to installation.
Next week I will receive the second SD card :D.

I boot from CD, select the 32GB disk (and let the RAID virtual disk alone), follow the installation steps, the partitions are created and the installation start.
On SD slot 1 I receive error on 55-58% of installation progress (see error_1 files)

I move the SD card on slot 2 and start again...and I receive other errors (see Error_2 files)

What I need to do to install and boot from SD cards? Any clue about the errors?
error_1.jpgerror_1_details.jpgerror_2.pngerror_2_details.png
 
You can start the installer using debug mode - simply type 'debug' at the boot prompt.

After that, you get a console at several stages - simply press CTRL-D to continue. When you get
the error, use 'Abort' to get a console - then inspect the install log /tmp/install.log for details.
 
Last edited by a moderator:

About

The Proxmox community has been around for many years and offers help and support for Proxmox VE, Proxmox Backup Server, and Proxmox Mail Gateway.
We think our community is one of the best thanks to people like you!

Get your subscription!

The Proxmox team works very hard to make sure you are running the best software and getting stable updates and security enhancements, as well as quick enterprise support. Tens of thousands of happy customers have a Proxmox subscription. Get yours easily in our online shop.

Buy now!