Container dont start eth1 (second interface)

[warn1ng]

Hi, i setup a second IP on a container, but when i start the container, only shows the eth0 with a IP and UP :



If i run "ifup eth1" it takes too long that i have to press CTRL+C, then i run "ip a" again and the interface shows UP and with IP :



How i can fix this, why is not going up when the container is starting up?.


Saludos

 

[matrix]

Hi,

Please post your config of the container pct config <vmid>

 

[warn1ng]

arch: amd64
cores: 1
hostname: ocs-dbcom
memory: 2048
nameserver: 172.16.2.1
net0: name=eth0,bridge=vmbr0,gw=172.16.2.1,hwaddr=5A:28:13:82:EA:E6,ip=172.16.2.22/24,ip6=dhcp,type=veth
net1: name=eth1,bridge=vmbr1,hwaddr=1E:81:E4:71:81:82,ip=172.16.1.22/24,ip6=dhcp,type=veth
ostype: debian
rootfs: local-LVM:vm-118-disk-0,size=25G
searchdomain: xxx.com
swap: 2048
unprivileged: 1

 

[warn1ng]

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
address 172.16.2.22
netmask 255.255.255.0
gateway 172.16.2.1

iface eth0 inet6 dhcp

auto eth1
iface eth1 inet static
address 172.16.1.22
netmask 255.255.255.0

iface eth1 inet6 dhcp

 

[warn1ng]

proxmox-ve: 5.3-1 (running kernel: 4.15.18-10-pve)
pve-manager: 5.3-8 (running version: 5.3-8/2929af8e)
pve-kernel-4.15: 5.3-1
pve-kernel-4.15.18-10-pve: 4.15.18-32
corosync: 2.4.4-pve1
criu: 2.11.1-1~bpo90
glusterfs-client: 3.8.8-1
ksm-control-daemon: 1.2-2
libjs-extjs: 6.0.1-2
libpve-access-control: 5.1-3
libpve-apiclient-perl: 2.0-5
libpve-common-perl: 5.0-44
libpve-guest-common-perl: 2.0-19
libpve-http-server-perl: 2.0-11
libpve-storage-perl: 5.0-36
libqb0: 1.0.3-1~bpo9
lvm2: 2.02.168-pve6
lxc-pve: 3.1.0-2
lxcfs: 3.0.2-2
novnc-pve: 1.0.0-2
proxmox-widget-toolkit: 1.0-22
pve-cluster: 5.0-33
pve-container: 2.0-33
pve-docs: 5.3-1
pve-edk2-firmware: 1.20181023-1
pve-firewall: 3.0-17
pve-firmware: 2.0-6
pve-ha-manager: 2.0-6
pve-i18n: 1.0-9
pve-libspice-server1: 0.14.1-1
pve-qemu-kvm: 2.12.1-1
pve-xtermjs: 3.10.1-1
qemu-server: 5.0-45
smartmontools: 6.5+svn4324-1
spiceterm: 3.0-5
vncterm: 1.5-3
zfsutils-linux: 0.7.12-pve1~bpo1

 

[Stoiko Ivanov]

If i run "ifup eth1" it takes too long that i have to press CTRL+C,

do you indeed have a dhcp6 server running on the network where eth1 is connected to? (Otherwise this would explain the long wait for a dhcp-timeout)
if you don't have a dhcp6 server - chose static in the GUI (both for configuring a static ip, and configuring an interface without ipv6)

I hope this helps!

 

[warn1ng]

do you indeed have a dhcp6 server running on the network where eth1 is connected to? (Otherwise this would explain the long wait for a dhcp-timeout)
if you don't have a dhcp6 server - chose static in the GUI (both for configuring a static ip, and configuring an interface without ipv6)

I hope this helps!

Yep, that works , thanks !!

 

[Stoiko Ivanov]

Glad that helped! please mark the thread as 'SOLVED' (this helps others who also search for this kind of problems)

Thanks!