connect: networking is unreachable. (Cannot access internet but can access LAN)

[hat]

Hello everyone. Thanks in advance to anyone that can assist me in this I am somewhat stumped. I just installed PVE 6 and re-setup my LACP connection with ovs-switch and I am able to reach destinations within my LAN but outside of the LAN I am unable to reach it and it actually doesn't even make an attempt:

root@stompr:~# ping 1.1.1.1
connect: Network is unreachable

 

[hat]

Solved: I needed to add a default route outside of the network.

root@stompr:~# ip route show
192.168.10.0/24 dev vlan10 proto kernel scope link src 192.168.10.10

Whoops

root@stompr:~# ip route add default via 192.168.10.1 dev vlan10
root@stompr:~# ping 1.1.1.1
PING 1.1.1.1 (1.1.1.1) 56(84) bytes of data.
64 bytes from 1.1.1.1: icmp_seq=1 ttl=58 time=20.7 ms
64 bytes from 1.1.1.1: icmp_seq=2 ttl=58 time=21.9 ms
^C
--- 1.1.1.1 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 3ms
rtt min/avg/max/mdev = 20.681/21.298/21.916/0.634 ms

In case anyone encounters the same problem.

 

[Stoiko Ivanov]

Glad you found the issue!
Please mark the thread as 'SOLVED' so that others know what to expect.

Thanks!

 

[voarsh]

I'm suddenly running into this problem and when I restart the LXC's/nodes I need to run this manually?

 

[adct2luv]

Solved: I needed to add a default route outside of the network.

root@stompr:~# ip route show
192.168.10.0/24 dev vlan10 proto kernel scope link src 192.168.10.10

Whoops

root@stompr:~# ip route add default via 192.168.10.1 dev vlan10
root@stompr:~# ping 1.1.1.1
PING 1.1.1.1 (1.1.1.1) 56(84) bytes of data.
64 bytes from 1.1.1.1: icmp_seq=1 ttl=58 time=20.7 ms
64 bytes from 1.1.1.1: icmp_seq=2 ttl=58 time=21.9 ms
^C
--- 1.1.1.1 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 3ms
rtt min/avg/max/mdev = 20.681/21.298/21.916/0.634 ms

In case anyone encounters the same problem.

You help me a lot BIG thanks

 

[WellingtonSantos]

Solved: I needed to add a default route outside of the network.

root@stompr:~# ip route show
192.168.10.0/24 dev vlan10 proto kernel scope link src 192.168.10.10

Whoops

root@stompr:~# ip route add default via 192.168.10.1 dev vlan10
root@stompr:~# ping 1.1.1.1
PING 1.1.1.1 (1.1.1.1) 56(84) bytes of data.
64 bytes from 1.1.1.1: icmp_seq=1 ttl=58 time=20.7 ms
64 bytes from 1.1.1.1: icmp_seq=2 ttl=58 time=21.9 ms
^C
--- 1.1.1.1 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 3ms
rtt min/avg/max/mdev = 20.681/21.298/21.916/0.634 ms

In case anyone encounters the same problem.

Funcionou