Hello friends, I have a question to see if you help me to configure my LAN, I have 3 servers in OVH with vrack, I have configured and running the cluster. Now my question is how to configure my network card to ping from the same network segment on different server.
This is my configuration
auto lo
iface lo inet loopback
iface eno1 inet manual
auto vmbr0
iface vmbr0 inet static
address 54.36.xxx.xxx.xxx
netmask 255.255.255.0
gateway 54.36.xxx.xxx.xxx
bridge_ports eno1
bridge_stp off
bridge_fd 0
# Mode Brigde ovrack
iface eno2 inet manual
auto vmbr2
iface vmbr2 inet static
address 172.16.0.1
netmask 255.240.0.0
bridge_ports eno2
bridge_stp off
bridge_fd 0
You could help me how to set up my LAN correctly.
Greetings
Translated with www.DeepL.com/Translator
This is my configuration
auto lo
iface lo inet loopback
iface eno1 inet manual
auto vmbr0
iface vmbr0 inet static
address 54.36.xxx.xxx.xxx
netmask 255.255.255.0
gateway 54.36.xxx.xxx.xxx
bridge_ports eno1
bridge_stp off
bridge_fd 0
# Mode Brigde ovrack
iface eno2 inet manual
auto vmbr2
iface vmbr2 inet static
address 172.16.0.1
netmask 255.240.0.0
bridge_ports eno2
bridge_stp off
bridge_fd 0
You could help me how to set up my LAN correctly.
Greetings
Translated with www.DeepL.com/Translator