[SOLVED] Configure iSCSI SAN

[Jaques]

Hi everyone!

I have two servers with 4 NICs in each.

In each server, 1 NIC is assigned the management IP and I'd like to configure two for iSCSI (multipath).

I've found this thread for the multipath setup https://forum.proxmox.com/threads/proxmox-7-iscsi-multipath-dell-me5084.119298/
but I'm looking for details on how to configure iSCSI itself within Proxmox.

I'm migrating from VMware, on which iSCSI setup is very familiar to me.

Thanks in advance!

 

[Moayad]

Hi,


Did you check our wiki guide [0]? If yes, could you please specify what you want help with? This will help us provide you more assistance.


[0] https://pve.proxmox.com/wiki/Multipath

 

[Jaques]

Hi,


Did you check our wiki guide [0]? If yes, could you please specify what you want help with? This will help us provide you more assistance.


[0] https://pve.proxmox.com/wiki/Multipath

Hi Moayad, I'm looking for details on how to configure iSCSI initiators/targets within Proxmox.

 

[bbgeek17]

Hi @Jaques ,
You may find this article to be helpful: https://kb.blockbridge.com/technote/proxmox-lvm-shared-storage/

If you need even more step by step instructions, you can find more than few guides on youtube:
https://www.youtube.com/watch?v=g5fhCiAETSU

Cheers

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox

 

[Jaques]

Hi @Jaques ,
You may find this article to be helpful: https://kb.blockbridge.com/technote/proxmox-lvm-shared-storage/

If you need even more step by step instructions, you can find more than few guides on youtube:
https://www.youtube.com/watch?v=g5fhCiAETSU

Cheers

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox

This is great, thanks -- I was able to connect.

 

[bbgeek17]

Happy to hear that it worked for you.

---

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox