compiling kernel error

N

Nemesiz

Renowned Member
Jan 16, 2009
778
80
93
Lithuania
I am trying to compile 2.6.32 pve kernel from scratch but it stops at:

cp -a iscsideb iscsi-scst/debian
cd iscsi-scst; export KVER=2.6.32-4-pve; dpkg-buildpackage -b -rfakeroot -us -uc
dpkg-buildpackage: warning: using a gain-root-command while being root
dpkg-buildpackage: set CFLAGS to default value: -g -O2
dpkg-buildpackage: set CPPFLAGS to default value:
dpkg-buildpackage: set LDFLAGS to default value:
dpkg-buildpackage: set FFLAGS to default value: -g -O2
dpkg-buildpackage: set CXXFLAGS to default value: -g -O2
dpkg-buildpackage: source package iscsi-scst
dpkg-buildpackage: source version 1.0.1.1-3
dpkg-buildpackage: source changed by Proxmox Support Team <support@proxmox.com>
dpkg-buildpackage: host architecture amd64
fakeroot debian/rules clean
make[1]: Entering directory `/home/nmz/pve-kernel-2.6.32_2010-09-20/iscsi-scst'
make[1]: *** No rule to make target `unpatch', needed by `clean'. Stop.
make[1]: Leaving directory `/home/nmz/pve-kernel-2.6.32_2010-09-20/iscsi-scst'
dpkg-buildpackage: failure: fakeroot debian/rules clean gave error exit status 2
make: *** [iscsi-scst.ko] Error 2
Click to expand...

unpatch - from where it appears
 
Thanks. Now another problem:

#update-pciids
cp /usr/share/misc/pci.ids pci.ids
./create-initrd-dir 2.6.32-4-pve
unable to find firmware: keyspan/usa49wlc.fw kernel/drivers/usb/serial/keyspan.ko
error exit
make: *** [initrd.img-2.6.32-4-pve] Error 99
Click to expand...
 
Ah it doesn't helped.

make[1]: Leaving directory `/home/nmz/pve-kernel-2.6.32_2010-09-20/busybox-1.14.0'
tar cpf busybox.tar -C busybox .
# busybox done
#update-pciids
cp /usr/share/misc/pci.ids pci.ids
# update-pciids done
# initrd.img
./create-initrd-dir 2.6.32-4-pve
unable to find firmware: keyspan/usa49wlc.fw kernel/drivers/usb/serial/keyspan.ko
error exit
make: *** [initrd.img-2.6.32-4-pve] Error 99


root@nmz:~/pve-kernel-2.6.32_2010-09-20# pveversion -v
pve-manager: 1.6-4 (pve-manager/1.6/5229)
running kernel: 2.6.32-4-pve
proxmox-ve-2.6.32: 1.6-20
pve-kernel-2.6.32-4-pve: 2.6.32-20
qemu-server: 1.1-19
pve-firmware: 1.0-9
libpve-storage-perl: 1.0-14
vncterm: 0.9-2
vzctl: 3.0.24-1pve4
vzdump: 1.2-8
vzprocps: 2.0.11-1dso2
vzquota: 3.0.11-1
pve-qemu-kvm: 0.12.5-2
ksm-control-daemon: 1.0-4
Click to expand...

I started to look in linux-2.6_2.6.32-22.diff and i found macvlan patch. So i just borrow iproute (20100519-3) from Debian squeeze and now i can use "ip link add link <phys> name <vif> address <mac address> type macvlan mode (bridge|vepa|private)".
 
You must log in or register to reply here.
Top Bottom