Cluster and some Problems

[shim_]

Hello,
I created a cluster but I didn't work as I expect, none from both nodes is a master and the webinterface does not work on both.

Node 1

root@ns3312040:~# pvecm status
Version: 6.2.0
Config Version: 3
Cluster Name: build-hive
Cluster Id: 40453
Cluster Member: Yes
Cluster Generation: 16
Membership state: Cluster-Member
Nodes: 1
Expected votes: 1
Total votes: 1
Node votes: 1
Quorum: 1  
Active subsystems: 5
Flags: 
Ports Bound: 0  
Node name: ns3312040
Node ID: 1
Multicast addresses: 239.192.xx.xx
Node addresses: 5.135.xx.xx
root@ns3312040:~# pvecm nodes
Node  Sts   Inc   Joined               Name
   1   M     16   2014-01-16 16:00:52  ns3312040
   2   X      0                        ns3312040

Node 2:

root@ns3003269:~# pvecm status
Version: 6.2.0
Config Version: 2
Cluster Name: build-hive
Cluster Id: 40453
Cluster Member: Yes
Cluster Generation: 4
Membership state: Cluster-Member
Nodes: 1
Expected votes: 1
Total votes: 1
Node votes: 1
Quorum: 1  
Active subsystems: 5
Flags: 
Ports Bound: 0  
Node name: ns3003269
Node ID: 1
Multicast addresses: 239.192.xx.xx
Node addresses: 37.59.xx.xx
root@ns3003269:~# pvecm nodes
Node  Sts   Inc   Joined               Name
   1   M      4   2014-01-16 13:51:52  ns3003269
   2   X      0                        ns3312040

Did anyone has Ideas how to fix my problem ?

 

[m.ardito]

hi,
do you remember which specific commands were used to create your cluster?

from what I see te nodes ip are from really different networks... is that right? can they reach each other? /etc/hosts reflects the real ip?

and, now pve is multi master (so no spof), so there will be no "master" node...

it shoud be more like this, (on both nodes)

# pvecm nodes
Node  Sts   Inc   Joined               Name
   1   M    316   2013-11-27 18:16:37  pve2
   2   M    320   2013-11-27 18:17:06  pve1

# pvecm status
Version: 6.2.0
Config Version: 2
Cluster Name: pvecluster
Cluster Id: 48308
Cluster Member: Yes
Cluster Generation: 320
Membership state: Cluster-Member
Nodes: 2
Expected votes: 2
Total votes: 2
Node votes: 1
Quorum: 2
Active subsystems: 5
Flags:
Ports Bound: 0
Node name: pve2
Node ID: 1
Multicast addresses: 239.192.xx.xx
Node addresses: xx.xx.xx.xx

 

[shim_]

Thanks for your answer!

from what I see te nodes ip are from really different networks... is that right? can they reach each other? /etc/hosts reflects the real ip?

Yes, they can reach each other .
Hosts (The same on both servers):

127.0.0.1	localhost.localdomain localhost
37.59.xx.xx      ns3003269.ip-37-59-xx.eu ns3003269
5.135.xx.xx	ns3312040.ip-5-135-xxx.eu	ns3312040
# The following lines are desirable for IPv6 capable hosts
#(added automatically by netbase upgrade)
::1     ip6-localhost ip6-loopback
feo0::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts

 

[dietmar]

Please can you post your cluster configuration /etc/pve/cluster.conf