Clean system, reinstall proxmox

[Hoper]

I want reinstall node proxmox after some trainings.
I am doing:

# apt-get purge proxmox-ve ntp ssh postfix ksm-control-daemon open-iscsi systemd-sysv
# apt-get autoremove
# apt-get clean
# shutdown -r now​

...
# apt-get install proxmox-ve ntp ssh postfix ksm-control-daemon open-iscsi systemd-sysv
and get error with pkgs

pve-cluster
libpve-access-control
librados2-perl
pve-firewall
pve-ha-manager
qemu-server
pve-container
pve-manager
proxmox-ve​

Proxmox don't installed.
What I need do for reinstall proxmox?

 

[dcsapak]

how did you first install it?

did you add the right repositories?
(see https://pve.proxmox.com/wiki/Package_repositories )

what are the exact error messages?

 

[Hoper]

What I did.
# apt-get purge proxmox-ve ntp ssh postfix ksm-control-daemon open-iscsi systemd-sysv
# apt-get clean
# apt-get autoclean
# shutdown -r now
...
# wget -O- "http://download.proxmox.com/debian/key.asc" | apt-key add -
# apt-get update && apt-get dist-upgrade
# apt-get install proxmox-ve ntp ssh postfix ksm-control-daemon open-iscsi systemd-sysv
#

Spoiler: look

Setting up apparmor (2.9.0-3) ...
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
Starting AppArmor profiles:Mounting securityfs on /sys/kernel/security....
Setting up uidmap (1:4.2-3+deb8u1) ...
Setting up lxcfs (2.0.3-pve1) ...
Setting up lxc-pve (2.0.4-1) ...
Setting up lzop (1.03-3) ...
Setting up netcat6 (1.0-8) ...
update-alternatives: using /bin/nc6 to provide /bin/nc (nc) in auto mode
Setting up novnc-pve (0.5-8) ...
Setting up numactl (2.0.10-1) ...
Setting up open-iscsi (2.0.873+git0.3b4b4500-8+deb8u1) ...
Starting iSCSI initiator service: iscsid.
Setting up iSCSI targets:
iscsiadm: No records found
.
Mounting network filesystems:.
Enabling network swap devices:.
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
Setting up powermgmt-base (1.31+nmu1) ...
Setting up vncterm (1.2-1) ...
Setting up pve-libspice-server1 (0.12.8-1) ...
Setting up pve-qemu-kvm (2.6.1-2) ...
Setting up socat (1.7.2.4-2) ...
Setting up ipset (6.23-2) ...
Setting up pve-firewall (2.0-29) ...
Failed to get D-Bus connection: Unknown error -1
dpkg: error processing package pve-firewall (--configure):
subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of qemu-server:
qemu-server depends on pve-firewall; however:
Package pve-firewall is not configured yet.

dpkg: error processing package qemu-server (--configure):
dependency problems - leaving unconfigured
Setting up ssl-cert (1.0.35) ...
Setting up postfix (2.11.3-1) ...
Adding group `postfix' (GID 115) ...
Done.
Adding system user `postfix' (UID 109) ...
Adding new user `postfix' (UID 109) with group `postfix' ...
Not creating home directory `/var/spool/postfix'.
Creating /etc/postfix/dynamicmaps.cf
Adding tcp map entry to /etc/postfix/dynamicmaps.cf
Adding sqlite map entry to /etc/postfix/dynamicmaps.cf
Adding group `postdrop' (GID 117) ...
Done.
setting myhostname: corvus.centr.by
setting alias maps
setting alias database
setting myorigin
setting destinations: corvus.centr.by, localhost.centr.by, localhost
setting relayhost:
setting mynetworks: 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128
setting mailbox_command
setting mailbox_size_limit: 0
setting recipient_delimiter: +
setting inet_interfaces: loopback-only

Postfix is now set up with a default configuration. If you need to make
changes, edit
/etc/postfix/main.cf (and others) as needed. To view Postfix configuration
values, see postconf(1).

After modifying main.cf, be sure to run '/etc/init.d/postfix reload'.

Running newaliases
Stopping Postfix Mail Transport Agent: postfix.
Starting Postfix Mail Transport Agent: postfix.
Setting up spiceterm (2.0-1) ...
Setting up gdisk (0.8.10-2) ...
Setting up libev-perl (4.18-1) ...
Setting up pve-docs (4.2-8) ...
dpkg: dependency problems prevent configuration of pve-manager:
pve-manager depends on qemu-server (>= 1.1-1); however:
Package qemu-server is not configured yet.
pve-manager depends on pve-firewall; however:
Package pve-firewall is not configured yet.

dpkg: error processing package pve-manager (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of proxmox-ve:
proxmox-ve depends on pve-manager; however:
Package pve-manager is not configured yet.
proxmox-ve depends on qemu-server; however:
Package qemu-server is not configured yet.

dpkg: error processing package proxmox-ve (--configure):
dependency problems - leaving unconfigured
Setting up python-blinker (1.3.dfsg2-1) ...
Setting up python-ply (3.4-5) ...
Setting up python-pycparser (2.10+dfsg-3) ...
Setting up python-cffi (0.8.6-1) ...
Setting up python-cryptography (0.6.1-1) ...
Setting up python-openssl (0.14-1) ...
Setting up python-ndg-httpsclient (0.3.2-1) ...
Setting up python-pyasn1 (0.1.7-1) ...
Setting up python-pyinotify (0.9.4-1) ...
dpkg: dependency problems prevent configuration of pve-ha-manager:
pve-ha-manager depends on qemu-server; however:
Package qemu-server is not configured yet.

dpkg: error processing package pve-ha-manager (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of pve-container:
pve-container depends on pve-ha-manager; however:
Package pve-ha-manager is not configured yet.

dpkg: error processing package pve-container (--configure):
dependency problems - leaving unconfigured
Processing triggers for libc-bin (2.19-18+deb8u4) ...
Processing triggers for systemd (215-17+deb8u4) ...
Processing triggers for python-support (1.0.15) ...
Errors were encountered while processing:
pve-firewall
qemu-server
pve-manager
proxmox-ve
pve-ha-manager
pve-container
E: Sub-process /usr/bin/dpkg returned an error code (1)
#

Proxmox don't set

 

[dcsapak]

as far as i can see with purging proxmox you deinstalled systemd and installed sysvinit-core

since proxmox depends on systemd please install it before

apt-get install systemd-sysv

then reboot and install proxmox

 

[Hoper]

No. It's not work.
# apt-get install systemd-sysv
# shutdown -r now
# apt-get install proxmox-ve ntp ssh postfix ksm-control-daemon open-iscsi systemd-sysv

Spoiler: look

etting recipient_delimiter: +
setting inet_interfaces: loopback-only

Postfix is now set up with a default configuration. If you need to make
changes, edit
/etc/postfix/main.cf (and others) as needed. To view Postfix configuration
values, see postconf(1).

After modifying main.cf, be sure to run '/etc/init.d/postfix reload'.

Running newaliases
Setting up spiceterm (2.0-1) ...
Setting up gdisk (0.8.10-2) ...
Setting up libev-perl (4.18-1) ...
Setting up pve-docs (4.2-8) ...
dpkg: dependency problems prevent configuration of pve-manager:
pve-manager depends on qemu-server (>= 1.1-1); however:
Package qemu-server is not configured yet.
pve-manager depends on pve-firewall; however:
Package pve-firewall is not configured yet.

dpkg: error processing package pve-manager (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of proxmox-ve:
proxmox-ve depends on pve-manager; however:
Package pve-manager is not configured yet.
proxmox-ve depends on qemu-server; however:
Package qemu-server is not configured yet.

dpkg: error processing package proxmox-ve (--configure):
dependency problems - leaving unconfigured
Setting up python-blinker (1.3.dfsg2-1) ...
Setting up python-ply (3.4-5) ...
Setting up python-pycparser (2.10+dfsg-3) ...
Setting up python-cffi (0.8.6-1) ...
Setting up python-cryptography (0.6.1-1) ...
Setting up python-openssl (0.14-1) ...
Setting up python-ndg-httpsclient (0.3.2-1) ...
Setting up python-pyasn1 (0.1.7-1) ...
Setting up python-pyinotify (0.9.4-1) ...
dpkg: dependency problems prevent configuration of pve-ha-manager:
pve-ha-manager depends on qemu-server; however:
Package qemu-server is not configured yet.

dpkg: error processing package pve-ha-manager (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of pve-container:
pve-container depends on pve-ha-manager; however:
Package pve-ha-manager is not configured yet.

dpkg: error processing package pve-container (--configure):
dependency problems - leaving unconfigured
Processing triggers for libc-bin (2.19-18+deb8u4) ...
Processing triggers for systemd (215-17+deb8u4) ...
Processing triggers for python-support (1.0.15) ...
Errors were encountered while processing:
pve-firewall
qemu-server
pve-manager
proxmox-ve
pve-ha-manager
pve-container
E: Sub-process /usr/bin/dpkg returned an error code (1)

It's like before

 

[dcsapak]

if you post the log output, please post the whole output and not just parts of it, else it will be difficult to fully understand what is happening

 

[Hoper]

Sorry, it's tooooo long
atache...

 

[dcsapak]

i can see following line:

Failed to reload-or-restart pve-firewall.service: Unit pve-firewall.service is masked.

this prevents pve-firewall to be setup correctly but the rest depends on pve-firewall

so fix this first then it should work

systemctl unmask pve-firewall.service

and try again

 

[Hoper]

Ooo. Good proxmox setup successful!!!
But... I got old settings, and I would like to CLEAN proxmox.
How get clean settings ?

 

[FireBlackHat]

I Have Same Problem -_-

Can You Help Me Please ? <3

Debian 8 Jessie