Cisco ACI Simulator Network is not working after boot

[mmamoliveira]

I tried to do run Cisco Simulator ACI in proxmox and it`s not working.

Basically I did upload the ova file to server proxmox.
I used qm importovf

qm importovf 104 acisim-6.0-9c.ovf ssd2tb --dryrun yes

output:

""""

{

"disks" : [

{

"backing_file" : "/var/lib/vz/template/iso/acisim-6.0-9c-disk1.vmdk",

"disk_address" : "scsi0",

"relative_path" : "acisim-6.0-9c-disk1.vmdk",

"virtual_size" : 214748364800

}

],

"net" : {

"net0" : {

"model" : "e1000"

},

"net1" : {

"model" : "e1000"

}

},

"qm" : {

"boot" : "order=scsi0",

"cores" : "12",

"memory" : "32768",

"name" : "acisim-6.0-9c",

"ostype" : "l26"

}

}

""""

And after that I did "qm importovf 103 acisim-6.0-9c.ovf ssd2tb --format qcow2"

The VM can run and boot works fine but the network is not working. Basic after the deploy I need to add two network adpater, but it`s not working, I`ve seen in post of Proxmox forum about create a file of network adapter but in this point this image is limited and I can`t change or create file of this network because the commands is limited.

Can anyone solve this issue? please help me...

 

[rfreitas]

Hi mmamoliveira,

Please, let me know if you tried convert the image to KVM instead of use "qm importovf".

Follow below a link with how to do.

https://tomislavk.blog/aci/acisim-on-kvm/

Best Regards and a big hug from Brazil.
Freitas.