Does anybody know if and how I could get this network card working in Proxmox?
I got a new system and have this card in it in hopes of setting it up with 10G.
The card works as expected under Windows (tried 11 and Server 2022) and it also works in TrueNAS Core.
However, when I'm booting up Proxmox the card stays offline.
When looking at dmesg the following 2 errors pop up multiple times:
cxgb4 0000:02:00.0: Unable to change power state from D3cold to D0, device inaccessible
cxgb4: probe of 0000:02:00.0 failed with error -5
They pop up on the installer already and the card never 'enables', the red indicator light stays on as well which appears to show it never initializes.
It does show up under lspci:
02:00.0 Ethernet controller: Chelsio Communications Inc T520-CR Unified Wire Ethernet Controller
02:00.1 Ethernet controller: Chelsio Communications Inc T520-CR Unified Wire Ethernet Controller
02:00.2 Ethernet controller: Chelsio Communications Inc T520-CR Unified Wire Ethernet Controller
02:00.3 Ethernet controller: Chelsio Communications Inc T520-CR Unified Wire Ethernet Controller
02:00.4 Ethernet controller: Chelsio Communications Inc T520-CR Unified Wire Ethernet Controller
02:00.5 SCSI storage controller: Chelsio Communications Inc T520-CR Unified Wire Storage Controller
02:00.6 Fibre Channel: Chelsio Communications Inc T520-CR Unified Wire Storage Controller
Any help and/or guidance is greatly appreciated, thanks!
EDIT: For some, to me unexplainable reason it all started working after revisiting the system a few days later and re-installing Proxmox a 3rd time.
I got a new system and have this card in it in hopes of setting it up with 10G.
The card works as expected under Windows (tried 11 and Server 2022) and it also works in TrueNAS Core.
However, when I'm booting up Proxmox the card stays offline.
When looking at dmesg the following 2 errors pop up multiple times:
cxgb4 0000:02:00.0: Unable to change power state from D3cold to D0, device inaccessible
cxgb4: probe of 0000:02:00.0 failed with error -5
They pop up on the installer already and the card never 'enables', the red indicator light stays on as well which appears to show it never initializes.
It does show up under lspci:
02:00.0 Ethernet controller: Chelsio Communications Inc T520-CR Unified Wire Ethernet Controller
02:00.1 Ethernet controller: Chelsio Communications Inc T520-CR Unified Wire Ethernet Controller
02:00.2 Ethernet controller: Chelsio Communications Inc T520-CR Unified Wire Ethernet Controller
02:00.3 Ethernet controller: Chelsio Communications Inc T520-CR Unified Wire Ethernet Controller
02:00.4 Ethernet controller: Chelsio Communications Inc T520-CR Unified Wire Ethernet Controller
02:00.5 SCSI storage controller: Chelsio Communications Inc T520-CR Unified Wire Storage Controller
02:00.6 Fibre Channel: Chelsio Communications Inc T520-CR Unified Wire Storage Controller
Any help and/or guidance is greatly appreciated, thanks!
EDIT: For some, to me unexplainable reason it all started working after revisiting the system a few days later and re-installing Proxmox a 3rd time.
Last edited: