Hello everyone,
I'm trying to troubleshoot an issue with my setup. I'm on the latest 9.2.26 and up to date on all updates as of today, on Kernel Linux 7.0.14-28. I have an ASRock Intel Arc A380 that I believe was fine until I ran into a system freeze issue. My setup is as follows: I have a Supermicro X10SRL-F motherboard running an Ubuntu Server no-GUI VM, also running on Linux kernel 7.0+ and ubuntu 24.04, with a Docker farm that hosts a lot of containers; two of them use the passthrough GPU for transcoding: the Jellyfin container and Immich. I had no issues, or so I thought, until I started to transcode my whole Immich library. The system would just hang; the whole host is hanging, not just the VM, which led me down this rabbit hole of troubleshooting. I've tried so many things, so I decided to pull the trigger and buy a new GPU (exactly the same model to isolate the testing). GPU came in, and it's basically the same problem, I'm now debating if it could be the board but I really doubt it. The symptoms are the system only hangs if I transcode heavily and/or simultaneously, which seems to be some type of starvation issue or hand off issue as immich does cpu decoding and the gpu does the transcoding, i tried on the original gpu to do decoding as well but it would freeze. I'm not sure if the kernel's might be pointint to an issue, I guess i would have to go to an older kernel and try it, but at this point I'm running out of ideas.
I'm trying to troubleshoot an issue with my setup. I'm on the latest 9.2.26 and up to date on all updates as of today, on Kernel Linux 7.0.14-28. I have an ASRock Intel Arc A380 that I believe was fine until I ran into a system freeze issue. My setup is as follows: I have a Supermicro X10SRL-F motherboard running an Ubuntu Server no-GUI VM, also running on Linux kernel 7.0+ and ubuntu 24.04, with a Docker farm that hosts a lot of containers; two of them use the passthrough GPU for transcoding: the Jellyfin container and Immich. I had no issues, or so I thought, until I started to transcode my whole Immich library. The system would just hang; the whole host is hanging, not just the VM, which led me down this rabbit hole of troubleshooting. I've tried so many things, so I decided to pull the trigger and buy a new GPU (exactly the same model to isolate the testing). GPU came in, and it's basically the same problem, I'm now debating if it could be the board but I really doubt it. The symptoms are the system only hangs if I transcode heavily and/or simultaneously, which seems to be some type of starvation issue or hand off issue as immich does cpu decoding and the gpu does the transcoding, i tried on the original gpu to do decoding as well but it would freeze. I'm not sure if the kernel's might be pointint to an issue, I guess i would have to go to an older kernel and try it, but at this point I'm running out of ideas.