Can't connect to GUI after installation

T

tonkan

New Member
Sep 27, 2023
3
0
1
I have installed Proxmox VE 8.0 and can connect to GUI for a short time.

After that I can't connect to GUI anymore and it was unable ping from the machine to 192.168.1.10 (proxmox server) in the same network. I'm not sure what's happening?

I have attached some information for your help.

Thank you.
 

Attachments

  • IMG_6520.jpeg
    IMG_6520.jpeg
    609.3 KB · Views: 13
Hello,

Now, ENO1 is up and I try connect to Gateway 192.168.1.89 and it's fine but still can't connect to GUI on browser.

Could you please help me?
 

Attachments

  • IMG_6521.jpeg
    IMG_6521.jpeg
    551.6 KB · Views: 9
My client use 192.168.1.170. it's on the same network.

I try ping from mobile to 192.168.1.10 (Proxmox) it's fine but can't ping from macbook to proxmox server.

Is this issues from macbook? Do you have suggest anything need to do more?
 
No one but you would know if there are any custom firewalls that might be blocking ICMP. In default installation you should not have a problem.

Execute this command from PVE locally and from Mac, or any other *IX based PC:
curl -sk https://192.168.1.10:8006|grep title

Blockbridge : Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox
 
Is the NIC a realtek RTL8169/RTL8168 (check with lspci -nnvmm | egrep -A 6 -B 1 -i 'network|ethernet')?
 
Last edited:
You must log in or register to reply here.
Top Bottom