Cannot boot 6.2 USB installer on Dell T5810

M

MattE

Member
Jan 12, 2018
20
1
8
43
I have been trying to create an installer USB stick for Proxmox 6.2 for my Dell Precision T5810. It can boot my Windows 10 USB installer but it cannot find a boot device when I create a USB Proxmox installer with Etcher or Rufus using the official USB installer guide (I have tried using two different W10 computers). I do have an external DVD-RW drive but no writable discs of any kind at home. Am I missing something simple or is it possible to create a SSD installer using a spare SSD?
 
After trying my 6.2 USB installer on another computer and verifying that the USB installer works there, I finally figured out the correct BIOS settings to boot a USB drive.
 
MattE said:
After trying my 6.2 USB installer on another computer and verifying that the USB installer works there, I finally figured out the correct BIOS settings to boot a USB drive.
Click to expand...
Hello Matte, I have the same issue on the Dell Precision T5810. What are the correct BIOS settings you figured out? Thanks in advance.
 
Last edited:
AHB said:
Hello Matte, I have the same issue on the Dell Precision T5810. What are the correct BIOS settings you figured out? Thanks in advance.
Click to expand...
I managed to boot from a USB installer on my workstation. I just pressed F12 to show the boot menu, and I was able to see the USB stick.
 
You must log in or register to reply here.
Top Bottom