[SOLVED] Cannot access VM console or manage VMs from webui (Failed to run vncproxy)

[fredamn76]

Hi.
I have trouble to access my VM and restarting/shutdown them. Then i install VMs i can access them in console but after reboot its no longer possible. I havent got access via network either. You can see the error cod below.

VM 104 qmp command 'change' failed - unable to connect to VM 104 qmp socket - timeout after 600 retries
TASK ERROR: Failed to run vncproxy.

root@pve:~# pveversion -v
proxmox-ve: not correctly installed (running kernel: 5.4.44-1-pve)
pve-manager: 6.2-10 (running version: 6.2-10/a20769ed)
pve-kernel-helper: 6.2-4
pve-kernel-5.4.44-1-pve: 5.4.44-1
pve-kernel-5.4.34-1-pve: 5.4.34-2
ceph-fuse: 12.2.11+dfsg1-2.1+b1
corosync: 3.0.4-pve1
criu: 3.11-3
glusterfs-client: 5.5-3
ifupdown: 0.8.35+pve1
ksm-control-daemon: 1.3-1
libjs-extjs: 6.0.1-10
libknet1: 1.16-pve1
libproxmox-acme-perl: 1.0.4
libpve-access-control: 6.1-2
libpve-apiclient-perl: 3.0-3
libpve-common-perl: 6.1-5
libpve-guest-common-perl: 3.1-2
libpve-http-server-perl: 3.0-6
libpve-storage-perl: 6.2-5
libqb0: 1.0.5-1
libspice-server1: 0.14.2-4~pve6+1
lvm2: 2.03.02-pve4
lxc-pve: 4.0.2-1
lxcfs: 4.0.3-pve3
novnc-pve: 1.1.0-1
proxmox-mini-journalreader: 1.1-1
proxmox-widget-toolkit: 2.2-9
pve-cluster: 6.1-8
pve-container: 3.1-12
pve-docs: 6.2-5
pve-edk2-firmware: 2.20200531-1
pve-firewall: 4.1-2
pve-firmware: 3.1-1
pve-ha-manager: 3.0-9
pve-i18n: 2.1-3
pve-qemu-kvm: 5.0.0-11
pve-xtermjs: 4.3.0-1
qemu-server: 6.2-11
smartmontools: 7.1-pve2
spiceterm: 3.1-1
vncterm: 1.6-1
zfsutils-linux: 0.8.4-pve1

root@pve:~# qm config 104
agent: 1
bootdisk: scsi0
cores: 1
ide2: none,media=cdrom
memory: 8000
name: hassioubuntu
net0: virtio=46:7B:BC:E1:40:22,bridge=vmbr0,firewall=1
numa: 0
ostype: l26
parent: AfterInitialConfig
scsi0: local-lvm:vm-104-disk-0,size=70G
scsihw: virtio-scsi-pci
smbios1: uuid=236c55bd-92d1-48f5-abd1-859e42b17026
sockets: 1
usb0: host=0451:16a8,usb3=1
usb1: host=0403:6015,usb3=1
vmgenid: 08306b32-e9e5-4bf4-9f5b-fed41c518352

 

[fredamn76]

I noticed myself that "proxmox-ve: isnt correctly installed". I installed it but my error remains.

root@pve:~# pveversion -v
proxmox-ve: 6.2-1 (running kernel: 5.4.44-2-pve)
pve-manager: 6.2-10 (running version: 6.2-10/a20769ed)
pve-kernel-5.4: 6.2-4
pve-kernel-helper: 6.2-4
pve-kernel-5.4.44-2-pve: 5.4.44-2
pve-kernel-5.4.44-1-pve: 5.4.44-1
pve-kernel-5.4.34-1-pve: 5.4.34-2
ceph-fuse: 12.2.11+dfsg1-2.1+b1
corosync: 3.0.4-pve1
criu: 3.11-3
glusterfs-client: 5.5-3
ifupdown: 0.8.35+pve1
ksm-control-daemon: 1.3-1
libjs-extjs: 6.0.1-10
libknet1: 1.16-pve1
libproxmox-acme-perl: 1.0.4
libpve-access-control: 6.1-2
libpve-apiclient-perl: 3.0-3
libpve-common-perl: 6.1-5
libpve-guest-common-perl: 3.1-2
libpve-http-server-perl: 3.0-6
libpve-storage-perl: 6.2-5
libqb0: 1.0.5-1
libspice-server1: 0.14.2-4~pve6+1
lvm2: 2.03.02-pve4
lxc-pve: 4.0.2-1
lxcfs: 4.0.3-pve3
novnc-pve: 1.1.0-1
proxmox-mini-journalreader: 1.1-1
proxmox-widget-toolkit: 2.2-9
pve-cluster: 6.1-8
pve-container: 3.1-12
pve-docs: 6.2-5
pve-edk2-firmware: 2.20200531-1
pve-firewall: 4.1-2
pve-firmware: 3.1-1
pve-ha-manager: 3.0-9
pve-i18n: 2.1-3
pve-qemu-kvm: 5.0.0-11
pve-xtermjs: 4.3.0-1
qemu-server: 6.2-11
smartmontools: 7.1-pve2
spiceterm: 3.1-1
vncterm: 1.6-1
zfsutils-linux: 0.8.4-pve1

 

[fredamn76]

When i try to ping my VM from my laptop i get this.

ping 192.168.1.55

Pinging 192.168.1.55 with 32 bytes of data:
Reply from 192.168.1.8: Destination host unreachable.
Request timed out.
Reply from 192.168.1.8: Destination host unreachable.
Request timed out.

Ping statistics for 192.168.1.55:
    Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),

 

[fredamn76]

I did a complete reinstall of Proxmox but the error remains. I created a new zfs pool and restored my old VMs.

Any ideas why i get the error "VM 100 qmp command 'change' failed - unable to connect to VM 100 qmp socket - timeout after 600 retries
TASK ERROR: Failed to run vncproxy" ?

root@pve:~# pveversion -v
proxmox-ve: 6.2-1 (running kernel: 5.4.34-1-pve)
pve-manager: 6.2-4 (running version: 6.2-4/9824574a)
pve-kernel-5.4: 6.2-1
pve-kernel-helper: 6.2-1
pve-kernel-5.4.34-1-pve: 5.4.34-2
ceph-fuse: 12.2.11+dfsg1-2.1+b1
corosync: 3.0.3-pve1
criu: 3.11-3
glusterfs-client: 5.5-3
ifupdown: 0.8.35+pve1
ksm-control-daemon: 1.3-1
libjs-extjs: 6.0.1-10
libknet1: 1.15-pve1
libproxmox-acme-perl: 1.0.3
libpve-access-control: 6.1-1
libpve-apiclient-perl: 3.0-3
libpve-common-perl: 6.1-2
libpve-guest-common-perl: 3.0-10
libpve-http-server-perl: 3.0-5
libpve-storage-perl: 6.1-7
libqb0: 1.0.5-1
libspice-server1: 0.14.2-4~pve6+1
lvm2: 2.03.02-pve4
lxc-pve: 4.0.2-1
lxcfs: 4.0.3-pve2
novnc-pve: 1.1.0-1
proxmox-mini-journalreader: 1.1-1
proxmox-widget-toolkit: 2.2-1
pve-cluster: 6.1-8
pve-container: 3.1-5
pve-docs: 6.2-4
pve-edk2-firmware: 2.20200229-1
pve-firewall: 4.1-2
pve-firmware: 3.1-1
pve-ha-manager: 3.0-9
pve-i18n: 2.1-2
pve-qemu-kvm: 5.0.0-2
pve-xtermjs: 4.3.0-1
qemu-server: 6.2-2
smartmontools: 7.1-pve2
spiceterm: 3.1-1
vncterm: 1.6-1
zfsutils-linux: 0.8.3-pve1

 

[fredamn76]

It seems i have a faulty usb dongle (zigbee stick) that have caused my issues. I unplugged the stick from my vms and now it works.