I have been playing with network bonding over the last two days and the primary issue I am having is that when I use bonding the networks in the VM's fail.. They just won't connect to the network..
Here is my network config..
Any ideas?
Secondary issues are the bonding mode..
When using 802.3ad the performance is terrible (95Mbps on a 2 x 1Gb link) and only seems to go through one of the network links.. That I am still playing with but so far balance-rr gets me the best raw performance of about 1.5Gbps..
Here is my network config..
Code:
# network interface settings
auto lo
iface lo inet loopback
iface eth0 inet manual
iface eth1 inet manual
auto bond0
iface bond0 inet manual
slaves eth0 eth1
bond_miimon 100
bond_mode balance-rr
auto vmbr0
iface vmbr0 inet static
address 192.168.0.251
netmask 255.255.255.0
gateway 192.168.0.1
bridge_ports bond0
bridge_stp off
bridge_fd 0
Any ideas?
Secondary issues are the bonding mode..
When using 802.3ad the performance is terrible (95Mbps on a 2 x 1Gb link) and only seems to go through one of the network links.. That I am still playing with but so far balance-rr gets me the best raw performance of about 1.5Gbps..