Hi,
mainly I am long time in the topic already, but it was with version 4. I made experiences, but many things gotten a lot better, fine grained and there for a bit more complicated.
I cannot start the install process of the guest system windows 10, I hope someone can spot the mistake easily. This is the first VM I start to setup. Somethings arent ready till here, which is the second HDD must still be added to the lvm. Then I have to care for network things still, cause the routed (bridged) solution I think then after it the firewall and last the setup of VMs, that can be duplicated...
Thanks upfront.
Here my settings:
mainly I am long time in the topic already, but it was with version 4. I made experiences, but many things gotten a lot better, fine grained and there for a bit more complicated.
I cannot start the install process of the guest system windows 10, I hope someone can spot the mistake easily. This is the first VM I start to setup. Somethings arent ready till here, which is the second HDD must still be added to the lvm. Then I have to care for network things still, cause the routed (bridged) solution I think then after it the firewall and last the setup of VMs, that can be duplicated...
Thanks upfront.
Here my settings:
root@ghost0 ~/proxmox # qm config 100
agent: 1,fstrim_cloned_disks=1,type=virtio
boot: cdn
bootdisk: scsi1
cores: 4
cpu: kvm64,flags=+md-clear;+spec-ctrl;+ssbd;+virt-ssbd;+amd-no-ssb;+hv-tlbflush;+hv-evmcs
ide1: local:iso/virtio-win.iso,media=cdrom,size=402812K
ide2: local:iso/Win10_2004_German_x64.iso,media=cdrom
localtime: 1
memory: 4096
name: GhostVMTest
numa: 1
ostype: win10
scsi1: local:100/vm-100-disk-0.qcow2,cache=unsafe,discard=on,size=35G,ssd=1
scsihw: virtio-scsi-pci
smbios1: uuid=2a150652-88c4-4e6b-b1a5-9d44b4307671
sockets: 2
unused0: local:100/vm-100-disk-1.qcow2
vga: qxl
vmgenid: 6a8da2a0-265a-44e1-bd76-5e2cac83182f
vmstatestorage: local
______________________________________________________
root@ghost0 ~/proxmox # cat /sys/module/kvm_intel/parameters/nested
N ____________________________________________________
root@ghost0 ~/proxmox # pveversion -v
proxmox-ve: 6.2-1 (running kernel: 5.4.44-2-pve)
pve-manager: 6.2-10 (running version: 6.2-10/a20769ed)
pve-kernel-5.4: 6.2-4
pve-kernel-helper: 6.2-4
pve-kernel-5.4.44-2-pve: 5.4.44-2
ceph-fuse: 12.2.11+dfsg1-2.1+b1
corosync: 3.0.4-pve1
criu: 3.11-3
glusterfs-client: 5.5-3
ifupdown: 0.8.35+pve1
libjs-extjs: 6.0.1-10
libknet1: 1.16-pve1
libproxmox-acme-perl: 1.0.4
libpve-access-control: 6.1-2
libpve-apiclient-perl: 3.0-3
libpve-common-perl: 6.1-5
libpve-guest-common-perl: 3.1-1
libpve-http-server-perl: 3.0-6
libpve-storage-perl: 6.2-5
libqb0: 1.0.5-1
libspice-server1: 0.14.2-4~pve6+1
lvm2: 2.03.02-pve4
lxc-pve: 4.0.2-1
lxcfs: 4.0.3-pve3
novnc-pve: 1.1.0-1
proxmox-mini-journalreader: 1.1-1
proxmox-widget-toolkit: 2.2-9
pve-cluster: 6.1-8
pve-container: 3.1-12
pve-docs: 6.2-5
pve-edk2-firmware: 2.20200531-1
pve-firewall: 4.1-2
pve-firmware: 3.1-1
pve-ha-manager: 3.0-9
pve-i18n: 2.1-3
pve-qemu-kvm: 5.0.0-11
pve-xtermjs: 4.3.0-1
qemu-server: 6.2-11
smartmontools: 7.1-pve2
spiceterm: 3.1-1
vncterm: 1.6-1__________________________________________________
root@ghost0 ~ # cat /etc/network/interfaces
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
iface lo inet6 loopback
auto eKp0s33A88
iface eKp0s33A88 inet static
address 88.99.210.91
netmask 255.255.255.192
gateway 88.99.210.65
# route 88.99.210.64/26 via 88.99.210.65
up route add -net 88.99.210.64 netmask 255.255.255.192 gw 587.101.210.65 dev eKp0s33A88
iface eKp0s33A88 inet6 static
address 2a01:4f8:1bbbb:3b5a::2
netmask 64
gateway fe80::1
________________________________________________________________
root@ghost0 ~ # lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
Address sizes: 39 bits physical, 48 bits virtual
CPU(s): 8
On-line CPU(s) list: 0-7
Thread(s) per core: 2
Core(s) per socket: 4
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 94
Model name: Intel(R) Xeon(R) CPU E3-1275 v5 @ 3.60GHz
Stepping: 3
CPU MHz: 3904.416
CPU max MHz: 4000.0000
CPU min MHz: 800.0000
BogoMIPS: 7200.00
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 8192K
NUMA node0 CPU(s): 0-7
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp md_clear flush_l1d
________________________________________________________________