Base Volume not displayed when adding LVM on NetApp ISCSI

[linuxnewb]

I know there is a known bug with listing LVM volumes on ISCSI. I am running 7.1-4 Issue is that I see the ISCSI but when I run 'pvesm status' This is what I see.

I would expect to see the volume. I have tried setting up multipath but I need the WWID.
Any ideas?

 

[bbgeek17]

The "pvesm status" does not show individual volumes/disk. It gives you a high level status of defined storage backends. Specifically what you will find in /etc/pve/storage.cfg

To see volumes, if you have any, you would do: pvesm list <storage>
https://pve.proxmox.com/pve-docs/pvesm.1.html

To get the WWID of the iSCSI lun you need to use Linux native tools, ie lsblk, lssci, scsi_id, etc

---

Ultra low latency all-NVME shared storage for Proxmox - https://www.blockbridge.com/proxmox