Backup job failed

[ptitdyno]

Good morning all,


my english is not very good i translate via google


I installed an updated PROXMOX 6.1.7 server,


for my home automation, for security I would like to make backups but I have errors


- On the LOCAL

- In NFS


Here is the code if anyone has an idea


Thank you

------------------------------------ Francais ------------------------------------------------

Bonjour a tous,

mon anglais n'est pas très bon je traduis via google

j'ai monté un serveur PROXMOX 6.1.7 mise a jour,

pour ma domotique, par sécurité je souhaiterais faire des sauvegardes mais j'ai des erreurs

- Sur le LOCAL
- En NFS

Voici le code si quelqu'un a une idée

Merci

------------------------------------------------------------------------------------------------------

INFO: starting new backup job: vzdump 100 --compress gzip --node pve --remove 0 --mode snapshot --storage NAS_NFS
INFO: Starting Backup of VM 100 (qemu)
INFO: Backup started at 2020-03-10 23:18:14
INFO: status = stopped
INFO: update VM 100: -lock backup
INFO: backup mode: stop
INFO: ionice priority: 7
INFO: VM Name: Jeedom
INFO: include disk 'scsi0' 'local-lvm:vm-100-disk-0' 32G
INFO: snapshots found (not included into backup)
INFO: creating archive '/mnt/pve/NAS_NFS/dump/vzdump-qemu-100-2020_03_10-23_18_14.vma.gz'
INFO: starting kvm to execute backup task
INFO: started backup task '61931434-3299-4fbf-9e35-41b2723bf572'
INFO: status: 0% (193855488/34359738368), sparse 0% (144252928), duration 3, read/write 64/16 MB/s
INFO: status: 1% (353501184/34359738368), sparse 0% (168644608), duration 10, read/write 22/19 MB/s
INFO: status: 2% (699400192/34359738368), sparse 0% (202276864), duration 24, read/write 24/22 MB/s
INFO: status: 3% (1043464192/34359738368), sparse 0% (251863040), duration 38, read/write 24/21 MB/s
INFO: status: 4% (1378222080/34359738368), sparse 0% (289488896), duration 54, read/write 20/18 MB/s
INFO: status: 5% (1729495040/34359738368), sparse 0% (334036992), duration 68, read/write 25/21 MB/s
INFO: status: 6% (2063204352/34359738368), sparse 1% (369913856), duration 82, read/write 23/21 MB/s
INFO: status: 7% (2425094144/34359738368), sparse 1% (486215680), duration 93, read/write 32/22 MB/s
INFO: status: 7% (2661941248/34359738368), sparse 1% (498966528), duration 103, read/write 23/22 MB/s
ERROR: job failed with err -5 - Input/output error
INFO: aborting backup job
INFO: stopping kvm after backup task
ERROR: Backup of VM 100 failed - job failed with err -5 - Input/output error
INFO: Failed at 2020-03-10 23:20:02
INFO: Backup job finished with errors
TASK ERROR: job errors

 

[Dominic]

Hi!

Can you create a backup of any other virtual machine?
Please also post the log output of your backup to the local storage.

 

[ptitdyno]

Hello,


I only have one virtual machine at the moment


I saw that it was possible to repair possible disk errors


which command to type? in the VM or in the PVE?


Thank you

 

[f.yakhyaev]

Hi.
What OC in VM?
Check your disk in proxmox
Command: systemctl -a /dev/sd(X) x - the letter of your drive

 

[Dominic]

Could you please provide the output of pvesm status?

 

[ptitdyno]

Hello forgive me for the tartive response,


here is the result of the order

root@pve:~# pvesm status
Name             Type     Status           Total            Used       Available        %
NAS_NFS           nfs     active      1893790208      1515169280       378080256   80.01%
local             dir     active        12319880         6552104         5122248   53.18%
local-lvm     lvmthin     active       197296128        43286770       154009357   21.94%

thank you

 

[ptitdyno]

Check your disk in proxmox
Command: systemctl -a /dev/sd(X) x - the letter of your drive

-------------------------------------------------------------------------------------------

root@debian-vm-jeedom:~# smartctl -a /dev/sda1
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               QEMU
Product:              QEMU HARDDISK
Revision:             2.5+
User Capacity:        34 359 738 368 bytes [34,3 GB]
Logical block size:   512 bytes
LU is thin provisioned, LBPRZ=0
Device type:          disk
Local Time is:        Fri Apr 10 15:51:36 2020 CEST
SMART support is:     Unavailable - device lacks SMART capability.

=== START OF READ SMART DATA SECTION ===
Current Drive Temperature:     0 C
Drive Trip Temperature:        0 C

Error Counter logging not supported

Device does not support Self Test logging
root@debian-vm-jeedom:~# smartctl -a /dev/sda2
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               QEMU
Product:              QEMU HARDDISK
Revision:             2.5+
User Capacity:        34 359 738 368 bytes [34,3 GB]
Logical block size:   512 bytes
LU is thin provisioned, LBPRZ=0
Device type:          disk
Local Time is:        Fri Apr 10 15:51:38 2020 CEST
SMART support is:     Unavailable - device lacks SMART capability.

=== START OF READ SMART DATA SECTION ===
Current Drive Temperature:     0 C
Drive Trip Temperature:        0 C

Error Counter logging not supported

Device does not support Self Test logging
root@debian-vm-jeedom:~# smartctl -a /dev/sda5
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-9-amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               QEMU
Product:              QEMU HARDDISK
Revision:             2.5+
User Capacity:        34 359 738 368 bytes [34,3 GB]
Logical block size:   512 bytes
LU is thin provisioned, LBPRZ=0
Device type:          disk
Local Time is:        Fri Apr 10 15:51:45 2020 CEST
SMART support is:     Unavailable - device lacks SMART capability.

=== START OF READ SMART DATA SECTION ===
Current Drive Temperature:     0 C
Drive Trip Temperature:        0 C

Error Counter logging not supported

Device does not support Self Test logging