I have been trying to import and mount zpools from a virtualized FreeNAS configuration. I have successfully imported the zpools. I am for some reason not able to access the directories where the vmdk's lived from the failed VMware environment. After importing the zpools I see the correct structure and the utilization appears right.
I have already exported vm's from vmware and imported them into Proxmox successfully. Went from a network down situation to a fully functioning vlan based network configuration! Kudos to me for learning the networking of Proxmox
What I am trying to do is get the datasets (I believe that is the correct term for what I am trying to access) mounted within PVE, then download the vmdk files from the old zpools. I will then upload them to the newly created zpools within Proxmox. I want to break all zpools from the old FreeNAS environment and reconfigure the pools. But I need to import the windows-based fileserver so I can access the documents that are stored on a separate pool/dataset.
I have exported the 4 zpools prior to writing this request for help at an attempt to begin from a clean slate. I know the data is there and available. I feel like I just missed a connection somewhere. Below is the output from various list commands to hopefully aid in assistance. I appreciate any assistance with this as the data I need to migrate contains family pictures, videos, etc.
Please let me know if any other info is necessary. I can figure out the rest once I can see the files through the shell or the WinSCP interface.
I have already exported vm's from vmware and imported them into Proxmox successfully. Went from a network down situation to a fully functioning vlan based network configuration! Kudos to me for learning the networking of Proxmox
What I am trying to do is get the datasets (I believe that is the correct term for what I am trying to access) mounted within PVE, then download the vmdk files from the old zpools. I will then upload them to the newly created zpools within Proxmox. I want to break all zpools from the old FreeNAS environment and reconfigure the pools. But I need to import the windows-based fileserver so I can access the documents that are stored on a separate pool/dataset.
I have exported the 4 zpools prior to writing this request for help at an attempt to begin from a clean slate. I know the data is there and available. I feel like I just missed a connection somewhere. Below is the output from various list commands to hopefully aid in assistance. I appreciate any assistance with this as the data I need to migrate contains family pictures, videos, etc.
Please let me know if any other info is necessary. I can figure out the rest once I can see the files through the shell or the WinSCP interface.
Code:
root@BN-VM-HOST1:/# zfs list
NAME USED AVAIL REFER MOUNTPOINT
Primary-Pool-1 834G 1.17T 201K /Primary-Pool-1
Primary-Pool-1/.system 627M 1.17T 219K legacy
Primary-Pool-1/.system/configs-1e6cbdfb415748b98d868947a6e14a88 32.9M 1.17T 32.9M legacy
Primary-Pool-1/.system/configs-1e9984bcf13340bcb68bc263ecb0a902 82.2M 1.17T 82.2M legacy
Primary-Pool-1/.system/cores 331M 1.17T 331M legacy
Primary-Pool-1/.system/rrd-1e6cbdfb415748b98d868947a6e14a88 76.8M 1.17T 76.8M legacy
Primary-Pool-1/.system/rrd-1e9984bcf13340bcb68bc263ecb0a902 86.2M 1.17T 86.2M legacy
Primary-Pool-1/.system/samba4 766K 1.17T 766K legacy
Primary-Pool-1/.system/syslog-1e6cbdfb415748b98d868947a6e14a88 8.83M 1.17T 8.83M legacy
Primary-Pool-1/.system/syslog-1e9984bcf13340bcb68bc263ecb0a902 7.74M 1.17T 7.74M legacy
Primary-Pool-1/.system/webui 201K 1.17T 201K legacy
Primary-Pool-1/BN-DOCKER-LINUX 76.6G 1.25T 14.1M -
Primary-Pool-1/BN-EXCHANGE 252G 1.37T 44.1G -
Primary-Pool-1/BN-PFSENSE 35.3G 1.21T 21.5M -
Primary-Pool-1/BN-ROOT-CA 25.2G 1.18T 12.6G -
Primary-Pool-1/BN-SECCAM 50.4G 1.20T 16.4G -
Primary-Pool-1/BN_DC1 90.7G 1.26T 20.5M -
Primary-Pool-1/VCENTER67 302G 1.47T 23.2M -
Primary-Pool-1/iocage 1.40M 1.17T 228K /Primary-Pool-1/iocage
Primary-Pool-1/iocage/download 201K 1.17T 201K /Primary-Pool-1/iocage/download
Primary-Pool-1/iocage/images 201K 1.17T 201K /Primary-Pool-1/iocage/images
Primary-Pool-1/iocage/jails 201K 1.17T 201K /Primary-Pool-1/iocage/jails
Primary-Pool-1/iocage/log 201K 1.17T 201K /Primary-Pool-1/iocage/log
Primary-Pool-1/iocage/releases 201K 1.17T 201K /Primary-Pool-1/iocage/releases
Primary-Pool-1/iocage/templates 201K 1.17T 201K /Primary-Pool-1/iocage/templates
Primary-Pool-2 378G 1.62T 219K /mnt
Primary-Pool-2/BN-DOCK-LIN-DEV 75.6G 1.68T 11.5G -
Primary-Pool-2/BN-FS-SERVER 75.6G 1.67T 22.9G -
Primary-Pool-2/BN-SUB-CA 25.2G 1.63T 12.4G -
Primary-Pool-2/BN-VEEAM 60.5G 1.64T 35.3G -
Primary-Pool-2/BN_DC2 90.7G 1.70T 20.0M -
Primary-Pool-2/ISO 50.4G 1.64T 27.6G -
Primary-Pool-3 762G 980G 128K /Primary-Pool-3
Primary-Pool-3/BN-SECCAM-STORAGE 762G 1.70T 4.20G -
Primary-Pool-4 4.06T 1.04T 128K /Primary-Pool-4
Primary-Pool-4/BN-FS-Storage 2.03T 1.33T 1.74T -
Primary-Pool-4/BN-VEEAM-Backups 2.03T 2.68T 397G -
Secondary-Pool-1 247G 1.06T 88K /Secondary-Pool-1
Secondary-Pool-1/vm-100-disk-0 8.25G 1.07T 4.13G -
Secondary-Pool-1/vm-100-disk-1 8.25G 1.07T 4.13G -
Secondary-Pool-1/vm-101-disk-0 10.3G 1.07T 438M -
Secondary-Pool-1/vm-101-disk-1 81.5G 1.14T 8.53G -
Secondary-Pool-1/vm-102-disk-0 81.5G 1.14T 8.50G -
Secondary-Pool-1/vm-102-disk-1 10.3G 1.07T 497M -
Secondary-Pool-1/vm-103-disk-0 25.8G 1.08T 14.8G -
Secondary-Pool-1/vm-103-disk-1 20.6G 1.08T 2.04G -
Secondary-Pool-2 21.9G 1.28T 21.9G /Secondary-Pool-2
Secondary-Pool-3 4.28M 1.69T 128K /Secondary-Pool-3
Secondary-Pool-4 2.39M 5.27T 88K /Secondary-Pool-4
Code:
root@BN-VM-HOST1:/# zpool status
pool: Primary-Pool-1
state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not support
the features. See zpool-features(5) for details.
scan: scrub repaired 0B in 00:55:13 with 0 errors on Sun Apr 25 00:55:27 2021
config:
NAME STATE READ WRITE CKSUM
Primary-Pool-1 ONLINE 0 0 0
raidz3-0 ONLINE 0 0 0
sdf ONLINE 0 0 0
sdg ONLINE 0 0 0
sdd ONLINE 0 0 0
sdz ONLINE 0 0 0
sdc ONLINE 0 0 0
sdi ONLINE 0 0 0
sdh ONLINE 0 0 0
sde ONLINE 0 0 0
errors: No known data errors
pool: Primary-Pool-2
state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not support
the features. See zpool-features(5) for details.
scan: scrub repaired 0B in 00:24:58 with 0 errors on Sun Apr 25 00:25:02 2021
config:
NAME STATE READ WRITE CKSUM
Primary-Pool-2 ONLINE 0 0 0
raidz3-0 ONLINE 0 0 0
sdl ONLINE 0 0 0
sdj ONLINE 0 0 0
sdp ONLINE 0 0 0
sdn ONLINE 0 0 0
sdo ONLINE 0 0 0
sdq ONLINE 0 0 0
sdm ONLINE 0 0 0
sdk ONLINE 0 0 0
errors: No known data errors
pool: Primary-Pool-3
state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not support
the features. See zpool-features(5) for details.
scan: resilvered 2.04G in 00:07:52 with 0 errors on Fri May 28 22:23:10 2021
config:
NAME STATE READ WRITE CKSUM
Primary-Pool-3 ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
sdu ONLINE 0 0 0
sdt ONLINE 0 0 0
sds ONLINE 0 0 0
sdr ONLINE 0 0 0
errors: No known data errors
pool: Primary-Pool-4
state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not support
the features. See zpool-features(5) for details.
scan: scrub repaired 0B in 03:45:56 with 0 errors on Sun Apr 11 03:46:01 2021
config:
NAME STATE READ WRITE CKSUM
Primary-Pool-4 ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
sdx ONLINE 0 0 0
sdy ONLINE 0 0 0
sdv ONLINE 0 0 0
sdw ONLINE 0 0 0
errors: No known data errors
pool: Secondary-Pool-1
state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not support
the features. See zpool-features(5) for details.
scan: scrub repaired 0B in 00:00:01 with 0 errors on Sun May 16 00:00:04 2021
config:
NAME STATE READ WRITE CKSUM
Secondary-Pool-1 ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
wwn-0x50000c9000026108 ONLINE 0 0 0
wwn-0x50000c9000025904 ONLINE 0 0 0
mirror-1 ONLINE 0 0 0
wwn-0x500605ba008c2e70 ONLINE 0 0 0
wwn-0x50000c90000174f0 ONLINE 0 0 0
mirror-2 ONLINE 0 0 0
wwn-0x50000c900000c8f0 ONLINE 0 0 0
wwn-0x50000c9000015de8 ONLINE 0 0 0
errors: No known data errors
pool: Secondary-Pool-2
state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not support
the features. See zpool-features(5) for details.
scan: scrub repaired 0B in 00:00:01 with 0 errors on Sun May 16 00:00:08 2021
config:
NAME STATE READ WRITE CKSUM
Secondary-Pool-2 ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
sdcb ONLINE 0 0 0
sdcc ONLINE 0 0 0
mirror-1 ONLINE 0 0 0
sdce ONLINE 0 0 0
sdcd ONLINE 0 0 0
mirror-2 ONLINE 0 0 0
sdcf ONLINE 0 0 0
sdcg ONLINE 0 0 0
errors: No known data errors
pool: Secondary-Pool-3
state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not support
the features. See zpool-features(5) for details.
scan: resilvered 3.16M in 00:00:05 with 0 errors on Fri May 28 23:45:49 2021
config:
NAME STATE READ WRITE CKSUM
Secondary-Pool-3 ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
sdch ONLINE 0 0 0
sdbk ONLINE 0 0 0
sdcj ONLINE 0 0 0
sdck ONLINE 0 0 0
raidz2-1 ONLINE 0 0 0
sdcl ONLINE 0 0 0
sdcm ONLINE 0 0 0
sdcn ONLINE 0 0 0
sdco ONLINE 0 0 0
errors: No known data errors
pool: Secondary-Pool-4
state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not support
the features. See zpool-features(5) for details.
scan: scrub repaired 0B in 00:00:08 with 0 errors on Sun May 16 00:00:14 2021
config:
NAME STATE READ WRITE CKSUM
Secondary-Pool-4 ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
sdcp ONLINE 0 0 0
sdcq ONLINE 0 0 0
mirror-1 ONLINE 0 0 0
sdcr ONLINE 0 0 0
sdcs ONLINE 0 0 0
errors: No known data errors