ASMedia SATA Controller recognized but no disk found.

Sep 5, 2022
3
0
1
Hello, I need some help.

I have installed PVE 7.2 on the following hardware:
- Supermicro mainboard X11SSM-F
- CPU Intel Xeon E3-1200 v6/7th gen
- RAM 64GB ECC
- 1 Samsung 860 250GB SSD
- 4 x 8TB WD Red Pro HDDs
- 1 SATA card ASMedia chipset 1064 and 1806 to which I connected 4 Samsung 860 1TB SSDs
I see everything except 1TB Samsung SSA drives
this is what i see with lspci
1662381358411.png
this is what i see with lspci -v
1662381655034.png
1662381707904.png
1662381574221.png
I see the ASMedia SATA Controller card with the single chipsets and like ahci but then in the PVE console I don't see any disk as per screenshot
1662381756675.png

What's wrong ?
Can I do anything to see SSDs?
Thanks for your help.
 
Last edited:
Da dies eine Unmenge von Daten sind, ist es etwas schwierig die auf Basis von Screenshots zu analysieren. Besser wäre die Asugaben als Textfile. Darüber hinaus: was meldet `lsblk --ascii -M -o +HOTPLUG,ROTA,PHY-SEC,FSTYPE,MODEL,TRAN` zurück? Weiters interessant: die Ausgabe von `dmesg` aus der Startup Phase, da müsste man sehen, was erkannt wird.
 
Hello, I need some help.

I have installed PVE 7.2 on the following hardware:
- Supermicro mainboard X11SSM-F
- CPU Intel Xeon E3-1200 v6/7th gen
- RAM 64GB ECC
- 1 Samsung 860 250GB SSD
- 4 x 8TB WD Red Pro HDDs
- 1 SATA card ASMedia chipset 1064 and 1806 to which I connected 4 Samsung 860 1TB SSDs
I see everything except 1TB Samsung SSA drives
this is what i see with lspci
View attachment 40731
this is what i see with lspci -v
View attachment 40733
View attachment 40734
View attachment 40732
I see the ASMedia SATA Controller card with the single chipsets and like ahci but then in the PVE console I don't see any disk as per screenshot
View attachment 40736

What's wrong ?
Can I do anything to see SSDs?
Thanks for your help.
Hey, did you ever get this card to work?