Right, I’ll do a fresh install later, I’m gonna back up my samba vm and then reinstall and I’ll be in touch
My write-up on iGPU passthrough for Ryzen 5700U. Should apply to your 5800H as well. Been playing Halo Infinite the past 3 weeks with iGPU passthrough working great. Tested on Ryzen 5700U and 7735HS. The github repo link has everything you need, as well as the correct instructions for configuration. The repo doesn't have the 5800H VBIOS so you'll need to use the instructions for vbios.c to extract the VBIOS yourself.
https://forum.proxmox.com/threads/amd-ryzen-5700u-7735hs-igpu-passthrough-windows-11.142811/
https://forum.proxmox.com/threads/amd-ryzen-5700u-7735hs-igpu-passthrough-windows-11.142811/
Last edited:
See my post above this reply. The github repo link has a vbios.c file that you can use to extract the VBIOS for your Ryzen iGPU.
Attachments
From the github instructions...
Make sure you've performed steps 1 through 4 first to ensure the kernel loads the
vfio modules.5. Load the
vfio-pci driver before the original one. This prevents the host from using the GPU and allows for virtualization. These are the default AMD + Sound drivers, but you can find the ones your system is using by running lspci -nnk and checking the "Kernel driver in Use" section.
Code:
echo "softdep radeon pre: vfio-pci" >> /etc/modprobe.d/vfio.conf
echo "softdep amdgpu pre: vfio-pci" >> /etc/modprobe.d/vfio.conf
echo "softdep snd_hda_intel pre: vfio-pci" >> /etc/modprobe.d/vfio.conf6. Refresh the kernel modules and restart:
Code:
update-initramfs -u -k all
shutdown -r now7. After the restart, validate that the Kernel driver in Use for these PCI devices is
vfio-pci now, with:
Code:
lspci -nnkThis is an example of what my /etc/modprobe.d/vfio.conf looks like. The first line of your
vfio.conf will probably be different based on how your computer detects hardware devices.
Code:
options vfio-pci ids=1002:1681,1002:1640
softdep radeon pre: vfio-pci
softdep amdgpu pre: vfio-pci
softdep snd_hda_intel pre: vfio-pci
Last edited:
Last edited:
I just uploaded the correct ROM file. You can find it on github here.
The dmesg output shows the amdgpu driver i
There are instructions on the github page that I linked with a small program called vbios.c that will extract the VBIOS. All that's needed is the
build-essential package from the apt repo to compile. Same result. Much less work.Where do I find the rom file or do I have to extract it via the link you posted
https://github.com/isc30/ryzen-7000...d715fc0bcb4f54e8c754dd/AMDGopDriver_5800H.rom
You need the audio BIOS as well if you want sound - https://github.com/isc30/ryzen-7000-series-proxmox/blob/main/AMDGopDriver.rom
Click the Download file link on the far right side of the page. It's next to the word 'Raw'.
Last edited:
Will this work with Docker? I just picked up an AceMagic that has the AMD Ryzen 7 5800U. I'm planning on using OPNsense along with a Plex server or Jellyfin server (ideally i can try one or the other not trying to run both at the same time) and want to use the iGPU for transcoding. However, I'm not sure if it would be better to run them in Docker containers or as VMs, and what the best way to get the iGPU to them would be. Has anyone done something like this? Is it possible to split the IGPU?
The guide at https://github.com/isc30/ryzen-7000-series-proxmox should help make the iGPU available, but I'm not sure of the best approach to get it working with Docker or a VM. Any thoughts or advice would be sincerly aprecciated.
The guide at https://github.com/isc30/ryzen-7000-series-proxmox should help make the iGPU available, but I'm not sure of the best approach to get it working with Docker or a VM. Any thoughts or advice would be sincerly aprecciated.
Last edited: