after new install, aptitude safe-upgrade fails [ solved ]

R

RobFantini

Famous Member
May 24, 2012
2,089
118
133
Boston,Mass
After a fresh install then aptitude safe-upgrade :
Code: 
Setting up pve-cluster (1.0-27) ...
Restarting pve cluster filesystem: pve-cluster.
input too long - aborting
dpkg: error processing pve-cluster (--configure):
 subprocess installed post-installation script returned error exit status 255
configured to not write apport reports
                                      Setting up libxml2-utils (2.7.8.dfsg-2+squeeze5) ...
dpkg: dependency problems prevent configuration of redhat-cluster-pve:
 redhat-cluster-pve depends on pve-cluster; however:
  Package pve-cluster is not configured yet.
dpkg: error processing redhat-cluster-pve (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of fence-agents-pve:
 fence-agents-pve depends on redhat-cluster-pve; however:
  Package redhat-cluster-pve is not configured yet.
configured to not write apport reports

....

Errors were encountered while processing:
 pve-cluster
 pve-manager
 proxmox-ve-2.6.32
 libpve-access-control
 qemu-server
 redhat-cluster-pve
 fence-agents-pve
                                         
Current status: 1 update [-89].

Note that I have backports enabled [ because nfs from backports has seemed to fixed some issues]. So maybe backports is causing the problem?
But we have 4 other systems using backports. But backports was added after a few pve upgrades on those systems...
 
Last edited:
Re: after new install, aptitude safe-upgrade fails

these are the backport packages:
Code: 
fbc103 s010 /var/log # grep bpo aptitude
[UPGRADE] cifs-utils 2:4.5-2+squeeze1 -> 2:5.2-1~bpo60+1
[UPGRADE] gawk 1:3.1.7.dfsg-5 -> 1:4.0.1+dfsg-2~bpo60+1
[UPGRADE] initramfs-tools 0.98.8 -> 0.99~bpo60+1
[UPGRADE] insserv 1.14.0-2 -> 1.14.0-2.2~bpo60+1
[UPGRADE] libcairo2 1.8.10-6 -> 1.10.2-7~bpo60+1
[UPGRADE] libfreetype6 2.4.2-2.1+squeeze3 -> 2.4.9-1~bpo60+1
[UPGRADE] libgeoip1 1.4.7~beta6+dfsg-1 -> 1.4.8+dfsg-2~bpo60+1
[UPGRADE] libgssglue1 0.1-4 -> 0.3-4~bpo60+1
[UPGRADE] libio-socket-ssl-perl 1.33-1+squeeze1 -> 1.43-1~bpo60+1
[UPGRADE] libkeyutils1 1.4-1 -> 1.5.2-2~bpo60+1
[UPGRADE] libnfsidmap2 0.23-2 -> 0.24-1~bpo60+1
[UPGRADE] libnspr4-0d 4.8.6-1 -> 2:4.9-3~bpo60+1
[UPGRADE] libnss3-1d 3.12.8-1+squeeze4 -> 2:3.13.5-1~bpo60+1
[UPGRADE] libpixman-1-0 0.16.4-1 -> 0.24.0-1~bpo60+1
[UPGRADE] libsqlite3-0 3.7.3-1 -> 3.7.13-1~bpo60+1
[UPGRADE] liburi-perl 1.54-2 -> 1.60-1~bpo60+1
[UPGRADE] libxapian22 1.2.3-2 -> 1.2.7-1~bpo60+3
[UPGRADE] memtest86+ 4.10-1.1 -> 4.20-1~bpo60+1
[UPGRADE] mutt 1.5.20-9+squeeze2 -> 1.5.21-5~bpo60+1
[UPGRADE] postfix 2.7.1-1+squeeze1 -> 2.9.1-2~bpo60+1
[UPGRADE] psmisc 22.11-1 -> 22.16-1~bpo60+1
[UPGRADE] rsyslog 4.6.4-2 -> 5.8.11-1~bpo60+2
[UPGRADE] samba-common 2:3.5.6~dfsg-3squeeze6 -> 2:3.6.6-2~bpo60+1
[UPGRADE] smbfs 2:4.5-2+squeeze1 -> 2:5.2-1~bpo60+1
[UPGRADE] sqlite3 3.7.3-1 -> 3.7.13-1~bpo60+1
[UPGRADE] x11-common 1:7.5+8+squeeze1 -> 1:7.6+8~bpo60+1
[UPGRADE] nfs-common 1:1.2.2-4squeeze2 -> 1:1.2.5-4~bpo60+1
 
You must log in or register to reply here.
Top Bottom
Back