After migration vrom HyperV to Proxmox can't realy attached 2 HDD's to VM W2K16 Server

[Ewald Borth]

Hello everybody,

i migreate my HyperV W2K16 Server to Proxmox. My VM have 3 HDD see here :



But after start and installation all Drivers i see only Boot Partition like that :



in HDD Management Tool i see all my HDD



When I set the drive letters, windows would then format both disks. What am I doing wrong ?!?

Thank You very much for Your support.

P.S:
1. i have all formats from my 3 Disks (RAW, VHDX, QCOW2).
2. i imported this to VM and initialise this as SCSI/IDE(only one Device)/SATA : same picture

 

[oguz]

hi,

did you install virtio drivers for SCSI?

please post the VM configuration qm config VMID

 

[Ewald Borth]

root@pve:/mnt/public/k# qm config 103
agent: 1
balloon: 4096
bios: ovmf
boot: order=sata0;ide2;net0;sata2
cores: 6
ide2: local:iso/virtio-win-0.1.204.iso,media=cdrom,size=543272K
machine: pc-q35-6.0
memory: 20480
name: VSV1-ADDC
net0: virtio=9AF:85:3B:1D:29,bridge=vmbr0,firewall=1
net1: virtio=86:76:38:60:78:AC,bridge=vmbr1,firewall=1
numa: 0
ostype: win10
sata0: NAS-VMS:103/vm-103-disk-0.raw,size=350G
sata1: NAS-VMS:103/vm-103-disk-3.raw,size=490596M
sata2: NAS-VMS:103/vm-103-disk-2.raw,size=256004M
scsihw: virtio-scsi-pci
smbios1: uuid=d2cc09c3-6ccd-4074-826a-b0af8f58384d
sockets: 2
unused0: NAS-VMS:103/vm-103-disk-1.raw
vmgenid: 7b276e4c-e41b-46d5-a48e-678846b7502c
root@pve:/mnt/public/k#

 

[Ewald Borth]

In this case i have 3 SATA HDD's

 

[Ewald Borth]

hi,

did you install virtio drivers for SCSI?

please post the VM configuration qm config VMID

I installed all drivers from VIRTIO-WIN.ISO, do You mean a extra separate installation ?

 

[oguz]

i migreate my HyperV W2K16 Server to Proxmox

how did you do that?

I installed all drivers from VIRTIO-WIN.ISO, do You mean a extra separate installation ?

no that should be fine.

In this case i have 3 SATA HDD's

did these disks exist on your previous installation or you've added them separately?

 

[spirit]

if you see the physical disk ,it's ok for the drivers (you could convert them later to virtio-scsi for better performance).

but if you don't see the filesystem, it seem that something has been wrong during the import/convertion of vhdx. (the capacity seem wrong too)