[SOLVED] AER: Multiple Corrected error received: 0000:00:1c.6 and PCIe Bus Error: severity=Corrected, type=Phys

[Vittorio]

Hi all

I'm getting a lot of this error on a Beelink minipc U59
The minipc has one M.2 Sata disk and one SSD internally

Oct 19 09:58:10 pve kernel: pcieport 0000:00:1c.6: AER: Multiple Corrected error received: 0000:00:1c.6
Oct 19 09:58:10 pve kernel: pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
Oct 19 09:58:10 pve kernel: pcieport 0000:00:1c.6:   device [8086:4dbe] error status/mask=00000001/00002000
Oct 19 09:58:10 pve kernel: pcieport 0000:00:1c.6:    [ 0] RxErr                  (First)
Oct 19 09:58:10 pve kernel: pcieport 0000:00:1c.6: AER: Multiple Corrected error received: 0000:00:1c.6
Oct 19 09:58:10 pve kernel: pcieport 0000:00:1c.6: AER: can't find device of ID00e6
Oct 19 09:58:10 pve kernel: pcieport 0000:00:1c.6: AER: Multiple Corrected error received: 0000:00:1c.6
Oct 19 09:58:10 pve kernel: pcieport 0000:00:1c.6: AER: can't find device of ID00e6
Oct 19 09:58:10 pve kernel: pcieport 0000:00:1c.6: AER: Multiple Corrected error received: 0000:03:00.0
Oct 19 09:58:14 pve kernel: pcieport 0000:00:1c.6: AER: Multiple Corrected error received: 0000:00:1c.6
Oct 19 09:58:14 pve kernel: pcieport 0000:00:1c.6: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
Oct 19 09:58:14 pve kernel: pcieport 0000:00:1c.6:   device [8086:4dbe] error status/mask=00000041/00002000
Oct 19 09:58:14 pve kernel: pcieport 0000:00:1c.6:    [ 0] RxErr                  (First)
Oct 19 09:58:14 pve kernel: pcieport 0000:00:1c.6:    [ 6] BadTLP

What should I check to fix these two errors?

Thanks

 

[philx21]

Hi Vittorio,

I came across your post because I had the exact same issue, Beelink minipc U59 and same errors in log.
I eventually found out other posts which allowed me to understand what is going on. It's related to power management on the M.2 disk.

To fix your issue you can add pcie_aspm=off to the default cmdline in /etc/default/grub :
GRUB_CMDLINE_LINUX_DEFAULT="quiet pcie_aspm=off"

Then update-grub and reboot.

Regards.

 

[Vittorio]

@philx21 thanks!

it seems that now those errors are not anymore in the syslog

 

[NMan]

@philx21 thanks man!! You are great!)
It helped me too!)