Additional configuration ip hetzner in proxmox

[manurando40]

I need help for network configuration in proxmox.
I have a server in hetzner with an additional ip and its respective separate mac. Following the instructions given in this tutorial
https://community.hetzner.com/tutorials/install-and-configure-proxmox_ve?title=Proxmox_VE/en
Network Configuration Host Bridged

IP host proxmox 95.217.xx.xx/26
ip adicuional 95.217.xx.xx/26
Mac separada 00:50:56:00:xx:xx

The configuration of my /etc/network/interfaces file
Network Configuration Host Bridged

# /etc/network/interfaces
### Hetzner Online GmbH - installimage
# Loopback device:
auto lo
iface lo inet loopback

iface enp1s0 inet manual

auto vmbr0
iface vmbr0 inet static
  address 95.217.198.xx
  hwaddress 00:50:56:00:xx:xx # MAC address of the NIC, required since Proxmox 7.0
  netmask 255.255.255.192
  pointopoint 95.217.xx.xx
  gateway 95.217.xx.xx
  bridge_ports enp1s0
  bridge_stp off
  bridge_fd 1

# for a subnet
auto vmbr1
iface vmbr1 inet static
  address 95.217.198.xx # additional ip
  netmask 255.255.255.192
  bridge_ports none
  bridge_stp off
  bridge_fd 0

I can't get the machines hosted in proxmox to have internet and to be accessible from the outside.

Any idea what is happening

 

[Moayad]

Are the VMs having an IP address?

 

[manurando40]

If specifically 95.217.198.xx netmask 255.255.255.192

 

[mvs]

I have a server in hetzner with an additional ip and its respective separate mac. Following the instructions given in this tutorial
https://community.hetzner.com/tutorials/install-and-configure-proxmox_ve?title=Proxmox_VE/en
Network Configuration Host Bridged

Host Bridged configuration of this tutorial makes no sense to me.

It should be something similar to:
Host

# /etc/network/interfaces
# Loopback device:
auto lo
iface lo inet loopback

iface enp1s0 inet manual

auto vmbr0
iface vmbr0 inet static
  address 95.217.198.xx
  netmask 255.255.255.192
  pointopoint 95.217.xx.xx
  gateway 95.217.xx.xx
  bridge_ports enp1s0
  bridge_stp off
  bridge_fd 1

Client

# /etc/network/interfaces
# Loopback device:
auto lo
iface lo inet loopback

# device: ens18
auto ens18
iface ens18 inet static
  address <additional IP>
  netmask 255.255.255.255
  pointopoint <gateway of the additional IP>
  gateway <gateway of the additional IP>

In VM config use vmbr0 as bridge and assigned virtual MAC as MAC address.

 

[manurando40]

This is exactly how I do it, but it doesn't work, the vm's take the ip but they don't have internet connection nor are they accessible from outside.
I opened a ticket with hetzner to have, which is what they tell me because apparently there is some kind of problem with the additional IP given.

 

[mvs]

This is exactly how I do it, but it doesn't work

Which config are you implementing, mine or from Hetzner tutorial? They are quite different in important details.

 

[manurando40]

Problem solved hetzner I give myself another initial ip and you are all Ok.

 

[manurando40]

Which config are you implementing, mine or from Hetzner tutorial? They are quite different in important details.

I follow the tutorial recommended by hetzner