adding nvme ssd

[atari]

My config is ryzen 5950x on asrock x570m pro, 64gb 3600, 1tb ssd nvme
I add today one more nvme 2tb, on mainboard but proxmox stack on bootning system, try to format it on usb adapter in proxmox, get it back on board same.
Try kernel 5.15-6.16 same, recovery same
Whit usb adapter nvme ssd work.
Any tip?

hdparm -I /dev/sdb

/dev/sdb:

ATA device, with non-removable media
Model Number: KINGSTON SKC2500M82000G
Serial Number: 50026B7684E7E762
Firmware Revision: S7781101
Standards:
Likely used: 1
Configuration:
soft sectored
head switch time > 15us
fixed drive
disk xfer rate <= 5Mbs
disk xfer rate > 5Mbs, <= 10Mbs
data strobe offset option
format speed tolerance gap reqd
Logical max current
cylinders 17218 0
heads 0 0
sectors/track 128 0
--
bytes/track: 512 bytes/sector: 0
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 0 MBytes
device size with M = 1000*1000: 0 MBytes
cache/buffer size = unknown
Capabilities:
IORDY not likely
Can perform double-word IO
R/W multiple sector transfer: not supported
DMA: not supported
PIO: pio0

proxmox-ve: 7.3-1 (running kernel: 6.1.6-1-pve)
pve-manager: 7.3-4 (running version: 7.3-4/d69b70d4)
pve-kernel-6.1: 7.3-3
pve-kernel-helper: 7.3-3
pve-kernel-5.15: 7.3-1
pve-kernel-5.19: 7.2-15
pve-kernel-6.1.6-1-pve: 6.1.6-1
pve-kernel-6.1.2-1-pve: 6.1.2-1
pve-kernel-6.1.0-1-pve: 6.1.0-1
pve-kernel-5.19.17-2-pve: 5.19.17-2
pve-kernel-5.19.17-1-pve: 5.19.17-1
pve-kernel-5.15.83-1-pve: 5.15.83-1
pve-kernel-5.15.60-2-pve: 5.15.60-2
ceph-fuse: 15.2.14-pve1
corosync: 3.1.7-pve1
criu: 3.15-1+pve-1
glusterfs-client: 9.2-1
ifupdown2: 3.1.0-1+pmx3
ksm-control-daemon: 1.4-1
libjs-extjs: 7.0.0-1
libknet1: 1.24-pve2
libproxmox-acme-perl: 1.4.3
libproxmox-backup-qemu0: 1.3.1-1
libpve-access-control: 7.3-1
libpve-apiclient-perl: 3.2-1
libpve-common-perl: 7.3-2
libpve-guest-common-perl: 4.2-3
libpve-http-server-perl: 4.1-5
libpve-storage-perl: 7.3-2
libspice-server1: 0.14.3-2.1
lvm2: 2.03.11-2.1
lxc-pve: 5.0.2-1
lxcfs: 5.0.3-pve1
novnc-pve: 1.3.0-3
proxmox-backup-client: 2.3.2-1
proxmox-backup-file-restore: 2.3.2-1
proxmox-mini-journalreader: 1.3-1
proxmox-offline-mirror-helper: 0.5.0-1
proxmox-widget-toolkit: 3.5.3
pve-cluster: 7.3-2
pve-container: 4.4-2
pve-docs: 7.3-1
pve-edk2-firmware: 3.20220526-1
pve-firewall: 4.2-7
pve-firmware: 3.6-3
pve-ha-manager: 3.5.1
pve-i18n: 2.8-2
pve-qemu-kvm: 7.1.0-4
pve-xtermjs: 4.16.0-1
qemu-server: 7.3-3
smartmontools: 7.2-pve3
spiceterm: 3.2-2
swtpm: 0.8.0~bpo11+2
vncterm: 1.7-1
zfsutils-linux: 2.1.9-pve1

 

[Richard]

My config is ryzen 5950x on asrock x570m pro, 64gb 3600, 1tb ssd nvme
I add today one more nvme 2tb, on mainboard but proxmox stack on bootning system, try to format it on usb adapter in proxmox, get it back on board same.
Try kernel 5.15-6.16 same, recovery same
Whit usb adapter nvme ssd work.
Any tip?

Probably a hardware (mainboard, controller) issue. Check whether it works with a different OS (e.g. booting ubunto live media or server from USB stick).