[SOLVED] Add WAL/DB to CEPH OSD after installation.

[Gilberto Ferreira]

Hi there.
I had have created a Proxmox CEPH Cluster with 3 servers and each one has 4 SSD DC Disk. Is it possible to add separated NVME to do WAL/DB "AFTER" everything is up and running, let's say a couple of weeks after?

Thanks

 

[gurubert]

Not online. You have to redeploy each OSD and that means data movement.
Usually this can be done on a host by host basis without losing too much redundancy.

 

[mitcHELLspawn]

This is not true actually. We have built a script at 45Drives that will help you do this if your OSDs are using LVM. https://scripts.45drives.com/add-db-to-osd.sh

 

[Gilberto Ferreira]

This is not true actually. We have built a script at 45Drives that will help you do this if your OSDs are using LVM. https://scripts.45drives.com/add-db-to-osd.sh

Thanks.
I will check out.

 

[mitcHELLspawn]

forgot to mention - ceph-volume also now offers this ability as well.

https://docs.ceph.com/en/latest/ceph-volume/lvm/migrate/

 

[Gilberto Ferreira]

forgot to mention - ceph-volume also now offers this ability as well.

https://docs.ceph.com/en/latest/ceph-volume/lvm/migrate/

So based in this docs from Ceph, I had used this:
- First set the osd to noout
ceph osd set-group noout osd
- Followed to stop it
systemctl stop ceph-osd@0
- Create lvm
ceph-volume lvm create --data /dev/sdc
- Check the lvm created
ceph-volume lvm list
- Create the new-db
ceph-volume lvm new-db --osd-id 0 --osd-fsid d1a7e434-53b0-4454-9060-851ae8ebe785 --target ceph-f8683677-0651-4d19-8e19-83aff7c
1cf07/osd-block-189361f7-7b82-42c0-bbac-833dd5b2a5454

Works fine.

Now do the same to the new-wal

ceph-volume lvm create --data /dev/sdd
ceph-volume lvm list
ceph-volume lvm new-wal --osd-id 0 --osd-fsid d1a7e434-53b0-4454-9060-851ae8ebe785 --target ceph-e8798be2-c799-4c31-b067-

After that I got:


Everything seems to be ok, but after start the osd unset the noout, I see this HEALTH_WARN:
HEALTH_WARN: 1 OSD(s) experiencing BlueFS spillover
osd.0 spilled over 768 KiB metadata from 'db' device (22 MiB used of 280 GiB) to slow device

Seems this is just a LAB and I am using Proxmox over Proxmox, with nested_virt, I am assuming this is something to do with the devices which is pretty much fake of pseudo devices.
In a real scenario with real devices this will not gonna happen, I suppose.

That's it.

 

[Gilberto Ferreira]

Actually I found a better way

https://docs.clyso.com/blog/ceph-volume-create-wal-db-on-separate-device-for-existing-osd/

 

[Gilberto Ferreira]

Ok.
Turns out I needs to do it in two process:
1 - in order to create the separate DB and add it to the OSD, I used the script provided by @mitcHELLspawn . Thanks a lot
So I did this:
vgcreate cephdb /dev/sdc
add-db-to-osd.sh -b 280G -d /dev/sdc -o 0
Works as charm.
2 - in order to create the separate WAL and add it to the OSD, I did the follows:
- set the osd to noout
- stop the osd-0
- create a lvm vg named cephwal: vgcreate cephwal /dev/sdd
- create a lvm lv named cephwal1: lvcreate -l 100%FREE -n cephwal1 cephwal
- create a new-wal
- ceph-volume lvm new-wal --osd-id 0 --osd-fsid OSD-FSID --target cephwal/cephwal1

And that's it!
No more HEALTH_WARN: 1 OSD(s) experiencing BlueFS spillover!!!

Thanks a lot guys for the tips.