Hi All,
I'm trying to configure two 10g link between TrueNAS-CORE VM to Mac Pro that connected to a UniFi switch. the first 10g link is the default proxmox bridge vmbr0 (LAN) and the second vmbr1 is for NFS and SMB sharing. the mac pro has 2 x 10Gbase-T RJ45 ports connected to SFP+ ports on unifi switch (Pro 48 poe). from the switch connected to proxmox server 10g SFP+ dual ports network PCIE card.
ATM it is connected however iperf test is not consistent range from 1g to 10g on both vmbr 0 and vmbr1. i also tried PTP proxmox server to the mac (using 10Gbase-T RJ45 transceiver with CAT6 cable) however i can't get 10g only 5g link but again link not consistent.
How do i configure the following:
Proxmox - ATM vmbr0 default Gateway bridge and vmbr1 set bridge Static IP/24?
Mac Pro - Port 1 set LAN (DHCP), Port 2 Static IP/24 NO Gateway mtu 1500?
TrueNAS - Port 1 set LAN (DHCP), Port 2 IPV4 /24 NO Gateway mtu 1500?
UniFi Switch - Create VLAN only (use by separate router) or use existing L3 Switch feature to create new network and assign both ports?
few days i tried different configuration(as above) but still cant get stable speed , i'm lost hope you can help.
please let me know if you need more information
Thank you
I'm trying to configure two 10g link between TrueNAS-CORE VM to Mac Pro that connected to a UniFi switch. the first 10g link is the default proxmox bridge vmbr0 (LAN) and the second vmbr1 is for NFS and SMB sharing. the mac pro has 2 x 10Gbase-T RJ45 ports connected to SFP+ ports on unifi switch (Pro 48 poe). from the switch connected to proxmox server 10g SFP+ dual ports network PCIE card.
ATM it is connected however iperf test is not consistent range from 1g to 10g on both vmbr 0 and vmbr1. i also tried PTP proxmox server to the mac (using 10Gbase-T RJ45 transceiver with CAT6 cable) however i can't get 10g only 5g link but again link not consistent.
How do i configure the following:
Proxmox - ATM vmbr0 default Gateway bridge and vmbr1 set bridge Static IP/24?
Mac Pro - Port 1 set LAN (DHCP), Port 2 Static IP/24 NO Gateway mtu 1500?
TrueNAS - Port 1 set LAN (DHCP), Port 2 IPV4 /24 NO Gateway mtu 1500?
UniFi Switch - Create VLAN only (use by separate router) or use existing L3 Switch feature to create new network and assign both ports?
few days i tried different configuration(as above) but still cant get stable speed , i'm lost hope you can help.
please let me know if you need more information
Thank you