1 Gb enbebded x4 NIC and 2x 10 Gb HP proliant 380 gen10 not recognised

[alfonsSF]

Hi.

I am new with proxmox and I must to put in function an HP server with the 6.3.2 PVE.
Is my first installation and, if works fine for my needs, I plan to subscribe and move to proxmox.

The system does not see the NICs.
Other OS as kde-neon, Esxi or windows can see them
I understand it's a driver question.

I supouse others have had the same trouble.

Any suggestion for getting the drivers?

I readed in a form tha its posible to install rpm packets of the RHEL drivers from HP, but I don't know if it is a good idea.

Thanks in advanced

Alf

 

[Ramalama]

• apt install pve-kernel-5.11

Try this first.

 

[alfonsSF]

unable to locate package pve-kernel-5.11.

Now, installrd a service pack for proliant, the system can see the NICs. It's only necessari make them UP.

But now I have a new problem. (I am new with porxmox)

My server has:
1 raid 6 for virtual machines
1 USB RAID SD lun for the proxmox OS
and i added a M2 unit (kingston) only for my service. I have neon installed.



For the spp I think somethig happened with the usb raid.

The ILO can see the unit. , the kingston M2 and the RAID6

But I try to install Proxmox again in the usb raid unit but I see only 3 options:
/dev/sda (223Bg. KINGSTON SA400MB)
/dev/sde (0MB. log file LUN)
/dev/sdf (0MB. SPI Flash LUN)

What could I do for install in the USB Raid LUN ?