smart errors

I had many problems related to VERY HIGH iowait on my Proxmox VE Systems using Crucial MX500, which is a Consumer SSD (and one with very little DRAM, so once that fills up, Performance drops like a Rock). Now I got 2 x Intel DC S3610 1.6 TB SSDs which should be very good for VM Storage or also...

I have encountered a problem where the decommissioned hard drive keeps receiving SMART alerts repeatedly. My PVE version is 8.2.4 and I am using DELL R750 hardware. Hard drives 0 and 1 are 1TB SSDs used for the OS installation of PVE. Hard drives 2, 3, 4, 5, 6, and 7 are 4TB mechanical drives...

Hello everyone, We have a brand new Dell T560 server with four RAID 1 arrays on a Dell PERC 11 card. Three of the RAID pools are SSD based, and the other one is a mechanical 7200 RPM based. About 3 weeks ago we started getting these messages in regards to one of the SSDs with SMART errors...

Hallo in die Runde, vor ein paar Tagen wollte ich mich mit meinem Proxmox Server verbinden wie gewohnt und stellte fest, dass keine Verbindung mehr aufgebaut werden konnte. Nachdem ich den "Behelfsmonitor" angeschlossen hatte sah ich den Fehler "Failed to start...

Hi there, I have 6 times a 14TB HDD in a ZFS Raid-z2. One disks has a counter of 4 for an Offline uncorrectable sectors. Advice is to replace the disk. One option of course is to just yank the drive out, send it for RMA and place the new drive once it arrives. But, I'm sure there is a more...

Hi, I'm new here since I've started using Proxmox VE and PBS 2 weeks ago, but I've already done some questions on other threads and received very useful hints from you. So it is time to give something back (nothing exceptional, just my 2 cents). I'm running a TIG stack...

Hello! I have the same log messages over and over again. For example today, two times since now: " Nov 9 08:18:21 npis01 smartd[3097]: Device: /dev/sda [SAT], SMART Prefailure Attribute: 7 Seek_Error_Rate changed from 200 to 100 Nov 9 08:18:21 npis01 smartd[3097]: Device: /dev/sdb [SAT]...

Dear Proxmox Users, I have a problem with a Windows Server 2019 VM on PVE 5.4.143-1. I looking for the reasons of this event, and a solution to avoid it in the future. Maybe You can help to figure it out. At morning we noticed, the Win server is slow, and the mssql not run. I try to restart...

Every day I'm getting 2 emails from my Proxmox server where I have Home Assistant installed with the following subject line: - SMART error (CurrentPendingSector) detected on host: pve The following warning/error was logged by the smartd daemon: Device: /dev/sda [SAT], 2 Currently unreadable...

Hello! One of my drive in a Synology was reported and marked as failing after a self test: I wanted to see how Proxmox would handle it and this happened: In GUI - Disk is reported as SMART Passed But the self test report the drive as failed. Here's the full SMART of the drive How does...

I have a small server with 2 ea 256G SSDs. Proxmox 4.4-24 installed on sda along with 4 VMs. sdb is used for backups (clones) of the VMs from sda. Last week one of the 4 VMs failed to clone. Unfortunately I had already deleted the known good clone from sdb. (yes you can slap me). SMART...