routed setup

Moin! Seit 2 Tagen versuche ich Proxmox mit IPv6 an den Start zu bringen, aber iwie bin ich anscheinend zu blöd. Der Dedi steht bei Hetzner und ich bin brav nach Hetzner Anleitung vorgegangen (Routed Setup)...

After banging my head for about a day as to why a CentOS 7 VM created via the latest official cloud-init image just wouldn't have networking at all, on both a Proxmox 7 & a Proxmox 8 server with routed networking at Hetzner, here's a short guide that might benefit others... As always, your...

Hello, i have a proxmox server with a single ip addres and that's my correct network configuration : # network interface settings; autogenerated source /etc/network/interfaces.d/* auto lo iface lo inet loopback auto eth0 iface eth0 inet manual iface eth1 inet manual auto vmbr0 iface vmbr0...

Dear people, I have been struggling on the following issue for about 2 days now, and figured I should take a break and ask for some advice on the forums. Furthermore, a note, I'm not super familiar to the networking part of IT, so that might be why this is not working out for me. (I have...

I have a dedicated server and a subnet on Hetzner, decided to use Network Configuration Hostsystem Routed config, was following their guide, https://community.hetzner.com/tutorials/install-and-configure-proxmox_ve Here's my server config: auto lo iface lo inet loopback iface lo inet6 loopback...

Hi all, I have a problem with the routing of additional IPs on vmbr0 which are from a different subnet. My installation is a proxmox PVE community 6.x on a hetzner root server. The networking setup is routed and my primary network segment is 138.201.52.x/26 with 138.201.52.41 as the main...