Currently PVE runs on 256GB NVME M.2 drive installed on PCI adapter. I've purchased Intel HPE IBM P3600 1.6TB HHHL PCI-E NVMe and I would like to install it and replace system drive.
My plan is to remove current drive and connect it via USB3 (adapter) and put in empty PCI slot a new drive...
Hello wanted to make a guide on how to change a drive on Proxmox backup server that only has 4 drives and all using rpool as a boot device and pve storage
First take the drive you want to replace offline.
to identify the drive that you want to replace by going into PBS and go to Storage/Tape...
Hi everyone,
clearly i am doing something wrong because every blog post/forum i read has almost the same instructions.
my skill level is 5/10 - still learning, first time had the disk failed :(
zpool replace pool_name full_old_disk_path full_new_disk_path
zpool replace rpool...
Hi there,
I have 6 times a 14TB HDD in a ZFS Raid-z2.
One disks has a counter of 4 for an Offline uncorrectable sectors.
Advice is to replace the disk.
One option of course is to just yank the drive out, send it for RMA and place the new drive once it arrives.
But, I'm sure there is a more...
Hi,
so (again) a disk went bad ("faulted") in a ZFS pool.
Server is a hp Proliant Microserver Gen 8 w. 4 x 4TB - the bad/new disk was/is the 1st/left one in the row, no hardware-RAID configured, not hot-plug.
I removed the faulted HD ("zpool offline").
Systems boots fine w. 3 HDs.
After...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.