redundant ring protocol

I have created a five node cluster and configurations are as follows bond0 created using two physical interfaces on each node bond1 created using two physical interfaces on each node Created Linux bridge as follows Create vmbr0 using bond0 and vmbr1 using bond1. Each node primary ip ( cluster...

Hi there! I am looking for a way to redundantly configure CEPH for a new pve cluster. The nodes have 1x10GBE and 2xGBE ports. The nice way would be to have 2x10GBE ports per node and bond them together and make different VLANs for CEPH, cluster comm, separate cluster network, WAN, LANd, DMZ ...

Hi all! I tested rrp in our test environment with ceph. Two physical separate network switches, one for cluster network (the nodes 10.10.10.0) and one for ceph network (172.16.0.0). I had the same experiences like the others described; if cluster network on one node is broken or offline, the vm...

Hi, I have 3 servers with 4 1GB NICs each. I have configured 2 networks for a Redundant Ring Protocol. Any of the networks is configured as a full mesh server network. ring0_addr: 192.168.10.11/29 ring1_addr: 192.168.20.11/29 After creating the cluster I want to add the second node. However...