pve 7.2-7

Hi, are there any issues with passing through a Sangoma D100 PCIe Card to a VM? It's a VoIP Transcoding card, I can't find and documented cases of it being passed-through on PVE. We want to use it on a Centos 7 VM with PVE 7.2-7. I don't want SR-IOV passthrough...

I've poked around the forums and search engines but I can't find a clear answer on how to get a new thick LVM volume built on top of an iSCSI LUN to show as available on all nodes in the cluster. I have a 5 node HA cluster with a small iSCSI SAN for some storage. When I add the new iSCSI LUN in...

Hallo an Alle, ich kann zwar ein Backup einspielen aber das löst das Problem nicht. Bei meinem 4 Node Cluster habe ich 2 VMs auf verschiedenen Nodes die dasselbe Problem haben. Diese 2 VMs starten in die UEFI-Shell obwohl die Bootreihenfolge stimmt und die EFI-Disk neu erstellt wurde. Mit einem...

I've been running PVE 6.4 up till now on a single HP Proliant DL380 Gen8 server for my home setup. This has been working fine ever since, but now I'm busy replacing the HP with a new PVE 7.2 cluster setup based on two Intel NUC units and a RPi as qdevice. These NUC's are each connected to the...

Hi, I recently posted about a similar issue here, and thought it was resolved and the reason found, but not so sure now. This morning I found that yet another scheduled backup had failed, same machine, an almost identical error; INFO: transferred 32.00 GiB in 7317 seconds (4.5 MiB/s) zstd...

Hallo Ich habe das Problem nach dem Update ixgbe 0000:06:00.1: Warning firmware error detected FWSM: 0x00108013 ixgbe 0000:06:00.0: Warning firmware error detected FWSM: 0x00108013 ixgbe 0000:06:00.1: Warning firmware error detected FWSM: 0x00108013 ixgbe 0000:06:00.0: Warning firmware error...