intel x710

Recurrent PVE node crashes after enabling IOMMU on Supermicro AMD hosts with Intel X710 (i40e) Hello, I am looking for feedback from anyone who may have run into a similar issue. We have two Proxmox VE nodes built on very similar Supermicro AMD platforms. Since enabling IOMMU in the BIOS, both...

Hello, Have upgraded my UnRaid server recently (5900XT/X570-P/Adaptec 71605/Intel X710-DA4 FH/64GB Unbuffered ECC), and have now made the move to Proxmox. Have set up a few VM (UnRaid, Debian, OPNsense). So far I've just used the motherboard port for most things while I've been setting up and...

I have a Minisforum MS-01. For some reason, Proxmox can't use the SFP+ ports to connect to the network. Not sure what to do anymore. I'm using an SFP+ -> RJ45 adapter from Ubiquiti. ethtool -i enp2s0f0np0 driver: i40e version: 6.8.12-10-pve firmware-version: 9.20 0x8000d8c5 0.0.0...

I've got a Dell XR-12 with an Intel X710. I need to enable SR-IOV, but it's not allowing it. Version Info: IOMMU is enabled: lspci: getting the named instance: and looking at the ethtool for ens4f3np3: But, if I try to enable the virtual functions on the interface, I get the...

Hello everyone, I have come across very peculiar issue. Some time ago my institution acquired 6 identical Dell r7515 servers. I've provisioned them into two Proxmox clusters 3 nodes each. They all have 10Gbit Intel X710 NIC, dual port, aggregated into LACP bond. 1st cluster works no problem...

I had an Intel i350 setup with SR-IOV and it was working fine. I could use ViFs with Linux, and Windows 11. I swapped out the i350 with an i710. This was smooth as the OS saw the new NIC and it seemed to work. I changed the # of Vifs from 7 for the i350 to 32 for the i710. I have assigned ViFs...

does anyone have success stories of passing a intel x710 virtual function to a win server 2022 instance? I was playing on a very old e7v3 intel system and x540 and can get vfs passed to linux guests but win 10 guest shows an unidentified device when i had a personal system i swear i got the...

Hello, I am testing Mikrotik CHR on a MS-01 from Minisforum with Proxmox 8.1.5. The machine has two SFP+ with Intel X710, two RJ-45 on an additional Intel X550-T2 on PCIe and two Intel I226. I use one I226-V nic for the management bridge. I have passed as raw devices one port from X550 and one...

Hi all, I'm new on Proxmox VE and on this forum too. I wish I could get help with my problem here. I build a lab with a R730 server with the latest Proxmox VE 8.14 (Kernel 6.5.11-8-pve) as hypervisor This one has 2 nics - one integrated 2P X520/2P I350 - one additional XL710-QDA2 I would to...

Has anyone configured a Dell R350 with ZFS on the 'soft' PERC S150 and used the Intel X710 NIC? I'm about to buy 4 and need to know if the hardware is supported before I pull the trigger :)