hardware failure

My server is running hardware that's between 5-6 years old aside from the drives that's been running 24/7 and I'm starting to have outages/crashes roughly every 9 days it seems. It literally just happened and caused VMs to start slowly locking up and once I got them powered down I was getting...

Hallo Community, nach dem ich mit meinem Proxmox Projekt (Home lab) gut voran gekommen bin, taucht mal wieder ein Problem auf. Ich nutze aktuell einen ZFS Pools im Raid1 mit zwei identischen SSD (Crucial 500MX, 1TB). Angelegt ist ein encrypted dataset. Als Hardware verwende ich den...

Hello, I am building a Proxmox cluster with at least three nodes. I will install the PVE OS on a RAID1 mirror using Kingston DC500M enterprise SATA drives. That way if one of the boot drives fails, the server should keep running. I will use ZFS storage with replication of my data/VM's between...

I have noticed in my syslog that during times of high throughput, I am getting this hardware hanging issue. How do I begin to troubleshoot this? Jun 26 21:39:45 TracheNodeA corosync[1828]: [KNET ] link: host: 1 link: 1 is down Jun 26 21:39:45 TracheNodeA corosync[1828]: [KNET ] host...

Hi, After a HW failure in a 3 nodes Proxmox VE 6.3 cluster, I replaced the HW, and re-joined the new node. The replaced node is called hystou1, the 2 other nodes are hystou2 and 3. I had a couple of minor issues when re-joining the new node since it has the same name, and I had to remove...

Hello, I recently had a motherboard fail so I built a new system, the previous build was using an intel chip the new one is using an amd ryzen. I simply moved over the drives from the old machine to the new one it boots up fine, I changed the iommu setting to amd instead of intel the problems...