frr

Hello, I have 4 Proxmox nodes with 2x10G interfaces. I am testing out a configuration without a switch. I have followed the tutorial in the https://pve.proxmox.com/wiki/Full_Mesh_Network_for_Ceph_Server The only difference between my setup and the setup in the tutorial is the addition of the...

Looks like my route setup wants to route over one of the hosts to get to another, even though i have all 3 100G dac cables, attached, it wont direct connect to the other host for some reason? pve1 => .1 pve2 => .2 pve3 => .3 pve1 port1 -> pve2 port 1 pve1 port 2 -> pve3 port 1 pve3 port2 ->...

Hello. Sorry, not a network specialist here, but a devops (higher level). Fairly spent about 4 days, read tons of manuals, and fundamental documents, and still confused about how EVPN SDN is supposed to work and why it doesn't work in my case. The goal is to have a L2 VXLan for my VMs regardless...

I'm very new to Ceph and have been trying to synthesize the instructions to create a 3 node full mesh routed (with fallback) cluster using Minisforum MS-01's (2x10Gbe + 2x 2.5Gbe): https://pve.proxmox.com/wiki/Full_Mesh_Network_for_Ceph_Server#Routed_Setup_(with_Fallback)...

Good day, I have new set of clusters to be deployed in environments where I do have needs for SDN (vxlan-evpn) and loopback routes for CEPH while preparing for IPv6 only networks. Though I did got it going at one stage (IPv4 only), there are still missing pieces/processes that I'm stumbling on...

Hi, I have a 3 node Proxmox cluster in a data center setup. They are connected via public gateway to internet over 1 GBPS connection. Also these hosts are equipped with 10GBPS connection and connected to a private switch. Please see attached diagram. I am planning to configure CEPH private...

I've been trying to integrate the Proxmox SDN into an existing vxlan network using IS-IS. This way we'll be able to use the different vnets across multiple clusters as well as bind that to a vlan to attach legacy devices. Our lab setup is using a route-reflector on a spine switch and 2 leaf...

Hello everyone, I configured a zone with multiple vrf with SDN functionality. I defined all nodes in my cluster as exit-nodes. Is it possible to define a primary exit-node per vnet rather than per zone? or to define it on the basis of the subnet? I would actually like to be able to set up SNAT...

Hi, I tried to configure a Ceph routed setup with fallback according to this post: Routed Setup (with Fallback). Everything seems to work and the status is ok, but `journalctl -u frr` shows a lot of time outs: Oct 03 13:52:02 host3 fabricd[2563]: [NT6J7-1RYRF] OpenFabric: Initial...

Hi ! As I tried to update a node this morning to latest FRR version, i get into a problem related to the latest FRR version (7.5.1-99+pve~really7.4) which has an issue regarding set src route-map instruction. The issue encoutered is exactly this one ...