amd iommu

Recurrent PVE node crashes after enabling IOMMU on Supermicro AMD hosts with Intel X710 (i40e) Hello, I am looking for feedback from anyone who may have run into a similar issue. We have two Proxmox VE nodes built on very similar Supermicro AMD platforms. Since enabling IOMMU in the BIOS, both...

Hi, I just wanted to Configure my VM with PCI Passthrough, but as soon as I start the VM, the Server just gives me a Timeout and nothing works. Ich checked that the "FCH SATA Controller [AHCI mode]" I am trying to pass to the VM is on it´s own IOMMU Group. I am very new to Proxmox and would...

Guten Tag, zu erst ein paar Infos: Zum System: ASrock b450m pro 4 R2.0 AMD Ryzen 5 5600G 32 GB RAM Proxmox 8.1.10 root@pve-02:~# dmesg | grep -e DMAR -e IOMMU [ 0.379933] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported [ 0.381426] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap...

Recently upgraded from PMX7 (Proxmox Version 7 or PVE7) to PMX8 (Proxmox Version 8 or PVE8), and I noticed the passthrough doesn't seem to work the same way in the UI it used to. <= PVE7, the way you knew IOMMU/etc wasn't working is that in the UI, the "MAPPED DEVICES" dropdown would be empty...

Hello all, I am pretty new to Proxmox and I want to utilize some old hardware I have laying around. Here is my setup: - Motherboard: Asrock 970 Pro3 - CPU: AMD FX-8350 - RAM: 16Gb DDR3 - Storage: 250Gb Crucial SSD for Proxmox + Intel DS SSD 480 GB for VMs - GPU: AMD RX 590 8Gb My settings are...

Hello there, I'm using proxmox 7.4-3 with an Ubuntu LXC for a while. It's been perfect. Today I decided to install a Windows VM and passthrough the AMD APU (My CPU is a Ryzen 4650GE PRO). I was able to install Windows using the following guide...

Hi, in my current setup on Intel C236 chipset with Xeon CPU I do a PCI passthrough of the on-board SATA controller to a TrueNAS VM, which works really great. I think about to replace the system with AMD hardare (Ryzen Pro with B550/X570) but I had read, that it maybe not possible to...

Hi, I used to have PCI passthrough for my graphics card NVIDIA Quadro P400 working fine in the version 6 of Proxmox. After the upgrade to version 7.3-3 it no longer works. I tried to reconfigure everything following https://pve.proxmox.com/wiki/Pci_passthrough, but it seems that the old...

Hello all, I learned about Proxmox from Teresa (Morgonaut). I read in the forum there’s another post mentioning her video - the New Way to build a Hackintosh. I don’t know much about virtualisation except running simple stuff like VMWare, VirtualBox, Parallels. So I guess Proxmox is a deep end...

Hi, While trying to enable SR-IOV for a fresh install of Proxmox 7.2 in Dell R7525, it is found that the NIC driver is not exposing sriov_numvfs in /sys/class/net/eno33/device. Please Help.. root@veena2:~# cd /sys/class/net/eno33/device/ root@veena2:/sys/class/net/eno33/device# ls...

Hi guys, sometimes during the day my promxox server crash. This time i found the error on syslog but i dont know what is the problem. This is what i have seen on syslog. ------------[ cut here ]------------ Jul 25 18:50:52 ripper kernel: WARNING: CPU: 0 PID: 197 at drivers/iommu/dma-iommu.c:511...